Larson Electronics Replacement Emergency Battery Assembly for HAL-EMG-KNL-26W-LED

The HAL-EMG-KNL-26W-LED-SP0002 from Larson Electronics is a Replacement Explosion Proof Emergency Battery Backup System that works with LED lighting systems to create an emergency lighting system. This battery backup system is encased in a Class I Division 1 cast aluminum enclosure that is also IP67 rated waterproof and can be used in both indoor and outdoor applications. The HAL-EMG-KNL-26W-LED-SP0002 is compatible with the Larson Electronics HAL-EMG-KNL-26W-LED. The HAL-EMG-KNL-26W-LED-SP0002 operates a maximum load of 26 W at unity power factor. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in a Class I Division 1 explosion proof cast aluminum case that is also IP67 waterproof and can be used in both indoor and outdoor applications. The HAL-EMG-KNL-26W-LED-SP0002 supports emergency illumination for a minimum of 90 minutes. At a maximum of 26 W at unity power factor, the HAL-EMG-KNL-26W-LED-SP0002 will provide input power to ballasted lamp supporting it at 100% of the AC rated output throughout the 90-minute emergency illumination period. Upon failure of normal power, the ballast instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the HAL-EMG-KNL-26W-LED-SP0002 automatically returns to charge mode. The battery capacity is fully restored in 24 hours. The ballast does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet). The HAL-EMG-KNL-26W-LED-SP0002 includes seal offs and the chico compound required for sealing. Customer provided cable is required and must be installed prior to applying the chico compound to seal. Compatible Lights: The HAL-EMG-KNL-26W-LED-SP0002 is compatible with the Larson Electronics` HAL-EMG-KNL-26W-LED. The HAL-EMG-KNL-26W-LED-SP0002 can replace broken, damaged or otherwise compromised battery backup systems on this units. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in the USA Quality 1. No Maintenance Nickel-Cadmium Battery.2. Copper Free Aluminum Alloy Construction.3. Universal 120 through 277VAC Operation 4. 90 Minute Battery Backup Runtime.5. Deep Discharge Battery Protection.6. 1/2” NPT Conduit Hub.7. Epoxy Powder Coat Finish.8. 10 Year Rated Lifespan.9. Fully Automatic Operation.10. Solid State Internal Electronics.11. Pilot Light AC Current Indicator.12. Test Switch for Emergency Operation Confirmation.13. Fully Electronic Circuit Control. Specifications / Additional Information HAL-EMG-KNL-26W-LED-SP0002 Replacement Explosion Proof Emergency Battery Backup Unit Approvals/Ratings Type: Replacement Emergency Battery Backup Assembly Class I, Divisions 1 & 2, Groups C & D Dimensions: 17.75"L x 6"W x 5"H Class II, Divisions 1 & 2, Groups E,F,G Seal Offs: Included with Chico Compound Class III Materials: Copper Free Aluminum Housing IP67 Waterproof Rating Mounting: Wall Mount/Flat Surface Mount UL 844 Wiring: 1/2" NPT Threaded for Conduit UL 924 U.L. Listing: U.S. Explosion Proof T3C Temperature Rating Battery Backup: High temp Nickel-Cadmium NFPA101 (Life Safety Code) Battery Input Voltage: (Dual) 120/277VAC @ 60Hz Customer Provided Cable Required Unit Life Expectancy: 10 years Battery Backup Runtime: 90 Minutes Battery Output Voltage: 12 VDC Nominal Special Orders- Requirements Battery Output Current: 1000mA (Constant) Contact us for special requirements Battery Output Power: 12 Watts (Max) Toll Free: 1-800-369-6671 Battery Operating Temp: 0¡C - +50¡C Battery Recharge Time: 24 hours from full discharge E-mail:[email protected] Down to Purchase-