Larson Electronics Red Lens and Reflector System for HL-85, RL-85, HL-85-HID, RL-85-HID Spotlights

Red Lens and Reflector System for HL-85, RL-85, HL-85-HID and RL-85-HID Spotlights. This red lens and reflector is a complete assembly. The seven inch lens/reflector amplifies the power of the spotlight while providing a pure red lens for hunting and other non-white light applications. Popular with hunters, red lenses are typically a snap on and off application to spotlights. However, when using polycarbonate lenses, stacking one lens on top of another can greatly reduce light output. Many times there is white light leakage, which defeats the purpose of the red lens anyway. By creating a complete red lens and reflector assembly, all the light produced by the bulb is passed through a single lens only. This maximizes light output. The picture above shows the beam produced on the HL-85-HID model in spot mode. Unlike most red lens configurations, replacing the clear lens with the red lens (instead of a snap on lens) preserves the beam length and power. The picture above shows the beam produced on the HL-85-HID model in flood mode. Unlike most red lens configurations, replacing the clear lens with the red lens (instead of a snap on lens) preserves the beam length and power. This is particularly important in flood mode, where the beam is already diffused. The red lens and reflector assembly is simply attached. The clear lens and reflector assembly is "spun" off. Our HL and RL spotlights enable the user to adjust the beam from spot (narrow and long beam) to a flood (short, wide and soft) beam. This is done by rotating the lens and reflector assembly. By continuing the counter clockwise rotation you can move from spot to flood, to completing the removing the assembly. The red lens and reflector is simply spun back on in its place.