Larson Electronics Portable Work Area Flood Lighting System - 360¡ Area Lighting System - 496 Watts - 60,000 Lumens

Made in the TexasThe WAL-3X160LED-43XWP50-100-WC-E2E Portable LED Flood Lighting system from Larson Electronics is IP65 rated, vapor proof, and uses three 48 inch LED light strips to produce a combined 57,600 lumens of light with 360¡ area coverage and three adjustable LED light heads producing a combined 2,400 lumens upwards lighting. Combined, this fixture produces 60,000 lumens while drawing only 498 watts.***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The WAL-3X160LED-4XWP50-100-WC-E2E work area LED flood light system provides a complete 360 degrees work area coverage with 60,000 lumens of light output. This portable LED light is mounted to a powder coated frame constructed from light weight aluminum with top mounted pick eye and rubber casters. Three 48" 160 watt LED light mounted within the frame produce a combined 57,600 lumens and provide 360¡ of area illumination around the fixture. The LED lights within this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and confined work spaces within the job site. Three 6 watt adjustable LED light fixtures produce a combined 2,400 lumens and provide additional area lighting or upward lighting.Three 6 watt adjustable LED light fixtures provide additional area lighting or upward lighting. Click Images to Enlarge This portable work area LED flood lighting system is comprised of three 48 inch LED light fixtures mounted within a portable stand fabricated from corrosion resistant aluminum with a durable powder coated finish. Three adjustable trunnion mounted fixtures are mounted on the top side of the frame to provide upward lighting, and can be positioned as needed by operators in the field. This flood light system can be positioned in its upright position to provide an intense flood beam covering 360¡ around the system, or suspended in its upright or laid down on its side positions to provide lighting within tanks and enclosed work areas. The triangle frame design provides stability for the flood system in when mounted in either position. A pick-eye located on the top of the frame allows operators to lower the flood light system into tanks through man-way entries. This fixture is equipped with locking casters to increase mobility within the work environment. Top mounted pick-eye allows operators easily move this unit from location to location, as well as aid in lowering into tanks through manway entry ways Locking casters aid in mobility in the field Each of the linear LED lamp draws 160 watts and produces 19,200 lumens with a color temperature of 5600K, which produces colors and details much more accurately than high pressure sodium or mercury vapor lamps. The LED lamps are covered by slide in polycarbonate lenses that protect the fixtures from overspray and debris. These lenses are easy to remove and replace. The copper free aluminum alloy lamp body is powder coated for added durability and resistance to corrosion. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. The top mounted LED flood lights consists of three six watt LED fixtures, with each fixture containing six 1-watt LEDs housed within a waterproof polycarbonate housing. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Mounting hardware consists of a stainless steel bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360¡/180¡ rotation to allow the operators to position each floor light as desired in the field.Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.Operators can daisy chain up to 3 units end to end in 120 volt or 6 units in 240 volt configurations. Click Images to Enlarge Included with this LED flood lighting system is 25 feet of 12/3 SOOW cord terminated in an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 straight blade plug for 110V wall outlets with ground, NEMA L5-15 twist lock plug for 125V twist lock outlets, and NEMA L6-15 twist lock plug for 240V twist lock outlets. The WAL-3X160LED-4XWP50-100-WC-E2E is equipped with a 5` whip terminated in a connector, allowing operators to connect multiple units together end to end for daisy chaining mutltiple units together. Operators can daisy chain up to 3 units end to end in 120 volt or 6 units in 240 volt configurations.This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. The LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. The compact design and 360¡ beam coverage makes this unit ideal for tank cleaning and MRO applications. Made in USA QualitySuperior LED Benefits1. Approved for confined spaces2. Led lamp head requires no lamping. 3. Durable Base Mount constructed of copper free aluminum. 4. No ballast box. No ballast to replace. 5. Extreme long life LEDs reduce maintenance and replacement costs.6. Three LED light heads. 7. 5600K Color Temperature8. 60,000 Lumens produced from only 496 watts.9. Mercury free shock proof LED lamp light heads.10. Polycarbonate lenses protect the LED lamp assemblies from dust, debris, and overspray 11. Top mounted pick eye allows for easy positioning of this unit1. 60,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off – No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety.Specifications / Additional Information WAL-3X160LED-43XWP50-100-WC-E2E C2D1 Flood light systemQuick SummaryLamp Type: 360¡ LED60,000+ Hour LED Life SpanListing: United States & Canada80% Lumen Retention after 60,000 HoursDimensions: 20"-W 50"-H 20"-D`Reduced Energy Consumption With Improved OutputWeight: 75 LbsVapor ProofVoltage: Universal Voltage 120-277V AC 50/60Hz Vibration Shock ResistantTotal Watts: 496 watts IP65 Rated WaterproofTotal Lumens: 60,000Outdoor Approved Lumens per Fixture: 19,200 / 2,400360¡ Flood Lighting SystemLuminous Efficacy: 86.67 / 130 Lm/WCherry Picking EyeletLamp Life: 60,000+ HoursOptional Locking CastersColor Temp: 5000KOver 50,000 Lumens Color Rendering Index: >75 CRIBeam Angle: 360¡Lighting Configuration: Omni-Directional Flood Pattern>LED Lamp Protection: (3) Polycarbonate lensesPower Efficiency: >95%Approved for Confined SpacesPower Factor: 0.992Special Orders- RequirementsMounting: Triangular Aluminum Base Stand, Top Pick-eyeContact us for special requirements Wiring: 25 feet 12/3 SOOW Cord w/ Cord CapToll Free: 888-325-4448Cord Cap: 5-15, L5-15, L6-15Intl: 1-903-270-1187Warranty: Yes - 3 Years*E-mail: [email protected] Scroll Down to Purchase-