Larson Electronics Hand Magnetic LED Spotlight - Adjustable Tilting Base - 25 Watts - 1000' Spot Beam

Buy American Compliant The HML-LED25WRE LED Handheld Spotlight is ideal for use in marine environments, industrial and commercial applications, heavy equipment illumination, vehicle lighting and law enforcement. This ultra compact LED light produces a 2750 lumen output with low voltage and amp draw, 50,000 hour service life and 12 to 32 volt compatibility providing operators with a versatile and powerful LED lighting solution. This spotlight offers high light output in a compact profile combined with a durable handle and a 100 pound grip magnetic base. The HML-LED25WRE LED handheld spotlight from Larson Electronics produces 2750 lumens of bright light while drawing less than 2.25 amps from a 12 volt electrical system. A single CREE 25 watt LED producing 2750 lumens is combined with a high output reflector to produce a narrow 10¡ spread spot beam approximately 1000’ long. This particular unit is ultra compact at 4.5" OD, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WRE series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The versatile mounting and high output adjustable light head make this spotlight ideal for hunting and off-road applications. This photo shows an open parking lot lit only by ambient light at approximately 9:00 pm`. This photo shows the LED25WRE in spot configuration. The building in the distance is 300` away, well illuminated by the LED spotlight. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Voltage: These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED WRE series LED lights can operate on current ranging from 12 to 32V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Durability: As well as unparalleled heat control, the LED WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to 85¡ Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.Mounting: This light is mounted to a 3.25 inch diameter magnetic base with 100lbs of grip and an impact resistant plastic handle for simple placement on any ferrous metallic surface and easy operation. The stainless steel hinge assembly on this unit allows the light angle to be adjusted for optimal light control. The adjusting hinges on this light are tensioned, allowing the user to simply position the light as desired without any need for locking the unit into place. Once positioned, the light will hold its position until the user again repositions it. Power: The HML-LED25WRE spotlight offers several detachable cord options for low voltage operation, including a 16 foot straight cord with cigarette plug, 21 foot straight cord with battery clamps, 21 foot straight cord with battery ring terminals and 16 foot coil cord with cigarette plug. CONDITIONS Vin min (V) = 9 toff (us) = 2.9 Vin nom (V) = 12 R1 (kohm) = 50.2 Vin max (V) = 32 L1 (uH) = 3.0 Vo min (V) = 6.5 L-Pk (A) = 2.9 Vo nom (V) = 6.8 L-rms (A) = 2.9 Vo max (V) = 7 Ipk (A) = 2.5 I-LED (A) = 2.2 R2 (ohm) = 0.10 Efficiency = .85 I-FET (A) = 2.2 fsw nom (kHz) = 150 fs min (kHz) = 77 Ts nom (us) = 6.666667 fs max (kHz) = 301 Base frequency- = 36~37Khz @ 12V Amplitude of pulse width- = 27Ms Outside: External dimmer- = 500Hz Inside : Current sensing from- 77KHz at 12V to 300KHz at 50V Specifications / Additional Information HML-LED25WRE LED Spotlight Internal LED Driver Features Lamp Type: CREE LED Fast average current control Dimensions: 5.75" x 4.36" Programmable off-time switching Watts: 25 Linear dimming input Led Drive %: 90% Short Protection w/ Skip Mode Voltage: 12-32 V DC Ambient Op Temp -40C to +85C Spot Beam: 1000` L Pin-compatible with the HV9910B Lighting Configuration: 10¡ Spot, 60¡ Flood Wiring: Multiple Options, See drop down menu Amps: 2.08 @ 12V DC - 1.04 @ 24V DC View Avg-Mode Driver Control PDF Lumens: 2750 LED Light Color: 6000K Special Orders- Requirements LED Life Expectancy: 50,000 hours Contact us for special requirements Materials: Aluminum Housing, Polycarbonate Lens Toll Free: 888-325-4448 Housing Colors: Black or White E-mail: [email protected] CE Certified 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-