Larson Electronics 7.5 kVA Hazardous Location Portable Power Distribution - C1D2 - 415V to 110V 1-phase - (4) EXP Pin/Sleeve Receptacles - 25' Cord MPD-HD2-309.32AB-SJ7.5SY-DZ-4.H01-M1

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MPD-HD2-309.32AB-SJ7.5SY-DZ-4.H01-M1 Hazardous Location Portable Power Distribution converts single-phase 415 V AC electrical current into single-phase 110 V AC in Class I, Division 2 rated sites. This unit provides operators the ability to safely tap into and distribute 415 V AC power from a variety of sources including generators and direct grid power.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS*

Portable Power Distribution Purpose and Use
The MPD-HD2-309.32AB-SJ7.5SY-DZ-4.H01-M1 temporary power distribution system gives operators the ability to power their 110 volt equipment from a single system. On the primary side, operators connect single-phase 415 volt line-in power using 25` of 10/3 AWG SOOW cord terminated in a EX 32A Pin & Sleeve Male Plug 3PH [415 V]. On the secondary side, operators may access four hazardous location 16A pin/sleeve receptacles for 110 V equipment.

Operation: A 25-foot 10/3 AWG SOOW line-in cord terminated in a EX 32A Pin & Sleeve Male Plug 3PH [415 V] brings single-phase 415 V power to the primary side of the system, which contains one 30-amp 2-pole 415 V Class I, Division 2 miniature circuit breaker, and passes power to the transformer. The NEMA rated 7.5 kVA Class I, Division 2 transformer converts single-phase 415 V to 110 V and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA rated Class I, Division 2 68.2-amp, single-phase 110V main lug only panel. The hazardous location secondary panel contains four 16-amp 1-pole 125V Class I, Division 2 miniature circuit breaker protecting four hazardous location 16-amp pin/sleeve 110 V Class I, Division 2 receptacles.

Click Photo to Enlarge	Click Photo to Enlarge	Click Photo to Enlarge

Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable, and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer`s needs. Larger units are available upon request and can be equipped with skids or be trailer mounted.

This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA, and can be equipped with skids or trailer mounted.

Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations.

Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or sales@larsonelectronics.com to discuss your specific requirements.