Larson Electronics 40W Low Voltage LED Fixture for Hazardous Location Lighting - C1D2 - 30' 12/2 SOOW Cord HAL-48-IPS-LED-24V-30C

The Larson Electronics HAL-48-IPS-LED-24V-30CÊLow Voltage LED Fixture is a powerful hazardous location lighting solution for Class I, Division 2 environments and wet locations. This powerful 46.88" long LED strip light produces 5000 lumens, operates from 24 AC/DC and is suitable for a variety of applications. Equipped with 30` of 12/3ÊSOOW cord, the unit contains triangle-end brackets for mounting.

The HAL-48-IPS-LED-24V-30CÊoffers high-output illumination in Class I, Division 2 hazardous locations. This low voltage explosion proof light can be operated with 24V AC/DCÊcurrent. The LEDs in this unit are Cree X-Lamp XR-E, which have been chosen for their high lumen per watt ratio and long life. These Cree LEDs provide over 125 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs.

These units are configured in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

This hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered.

LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.

LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.

Wiring: These hazardous area LED lights are equipped with 30` of 12/3 SOOW cord.

Mounting: Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.