Larson Electronics 33W Low Voltage LED Fixture for Hazardous Location Lighting - C1D2 - 40' 16/2 SOOW Cord

The Larson Electronics HAL-48-33W-LED-40C Low Voltage LED Fixture is a powerful hazardous location lighting solution for Class I, Division 2 environments and wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates from 12 or 24V DC and is suitable for a variety of applications. Equipped with 40` of 16/2 SOOW cord, the unit contains triangle-end brackets for mounting. The HAL-48-33W-LED-40C offers high-output illumination in Class I, Division 2 hazardous locations. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current. The LEDs in this unit are Cree X-Lamp XR-E, which have been chosen for their high lumen per watt ratio and long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. These units are configured in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. This hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Wiring: These hazardous area LED lights are equipped with 40` of 16/2 SOOW cord. Mounting: Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170¡ vertically for the best placement. The entire assembly weighs 2.8 lbs and measures 46.88 inches in length, and 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HAL-48-33W-LED-40C Hazardous Location LED Lighting Ratings Listing: United States and Canada Class I, Division 2 Groups A,B,C,D Lamp Technology: Cree LED CSA 22.2 No. 250.0 Dimensions: 46.88"-L 2.68" -W 1.69"- D IP54 Ingress Protection Weight: 2.8lbs Voltage: 12V DC or 24V DC Frequency: - Total Watts: 33.6W Total Lumens: 2,416 lms Luminous Efficacy: 90 Lm/W Expected Lamp Life: 100,000+ Hours LED Color Temperature: 6500K Color Rendering Index: 75 Lamp Type: - Lamp Base: - Replacement Lamp: - Beam Configuration: 100¡ Flood or 30¡ Spot Power Efficiency: - Power Factor: - Amps: 2.64A @12V DC, 1.32A @ 24V DC Ambient Temperature Range: -40¡C to +85¡C Temp Rating: T3 Special Orders- Requirements Housing Material: Aluminum Contact us for special requirements Lens Material: - Toll Free: 888-325-4448 Mounting: Standard Triangle End Brackets Intl: +01-903-498-3364 Wiring: 40` 16/2 SOOW Cord Fax: 1-903-498-3364 Color: Black or White E-mail: [email protected] Scroll Down to Purchase-