Larson Electronics 36W Golight LED Spotlight - Telescoping Pole Mount/Mounting Bracket - Wireless Remote - 16' Cord

The TPM-GL30674-16CC Golight LED Spotlight Light on Telescoping Pole Mount with Mounting Bracket from Larson Electronics produces a 2,520 lumen light beam capable of reaching over 900 feet in distance. The unit features an adjustable pole that can be extended up to 9.08 feet and retracted to 4 feet. This 36 watt LED Golight offers wireless remote pan and tilt control and a single handheld remote control. The TPM-GL30674-16CC Golight LED pole mount light is designed for use in all weather conditions and produces 2,520 lumens of intense light output. These units feature remote control operation that allows users to rotate the light 370 degrees with a hard stop and to adjust vertical tilt through 135 degrees. The telescoping pole is adjustable from 4 feet to 9.08 feet. Remote operation is provided by one handheld wireless remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 100 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3/8 inch thick. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Remote Operation: Remote control functions include on/off, and 4 buttons which control up, down, left and right movement. The light will continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in position. A fast and slow mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for 12 seconds in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and is approximately 35 seconds for full rotation and 20 seconds for one full range of tilt. Durability: The GL-30674 is designed for demanding outdoor use with a weather resistant housing constructed of high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and abusive conditions. This particular Golight Stryker has a durable white finish, making it ideal for docks and buildings where an attractive appearance is desired. Remote movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly that is constructed of LEXAN, brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation. Mounting: The pole used with the TPM-GL30674-16CC is the ALU-P-158. The pole is adjustable from 4 feet to 9.08 feet with the Golight attached and from 3.19 feet to 8.35 feet with the Golight removed. The pole mount allows the light to be easily installed and/or removed and stored from the top of the pole. The TPM-GL30674-16CC also includes a mounting bracket that allows operators to install the light in their required location. The mount bracket features four predrilled holes for mounting to any flat vertical surface. Once the mounting bracket is installed, the pole is then slipped into the bracket and secured with a T-handle bolt. Power: This light operates with 12 volts DC and draws 3 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct current. This unit is equipped with a 16 foot coil cord that is equipped with a cigarette plug, battery clamps, or ring terminals. Please choose cord termination below. We also carry an AC/DC power converter that allows operation with common 110-120V AC household current. A large field at a park with no illumination save the distant street lights behind. This photo shows the LED Golight being used to spot light the distant trees, located approx. 800` from the unit. Light Output: The LED lamp in this Golight is a 36 watt high intensity LED assembly which produces 2520 lumens and a narrow spot beam over 900 feet in length. This lamp has a 6000K color temperature, giving it good color rendering and contrasting properties and the ability to clearly and sharply illuminate objects at long distances. This beam is effective to the far end of its reach, producing enough illumination to read a book at 900 feet. This high power LED Golight is ideal for boating, fishing, law enforcement, emergency services, and utilities. This unit produces a more powerful and far reaching beam than halogen spotlights and uses less power on a 12 volt system, making it well suited to vehicles and boats where power supply is limited. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information TPM-GL30674-16CC Golight LED Boat Light Summary/Certifications Lamp Type: LED 36 Watts, 2520 Lumens Lamp Dimensions: 6" W x 6" Depth x 6" H Remote Control, 100` Range Pole Dimensions: 4` to 9.08` w/ Light Head (3.19` to 8.35` Without) 1.375" Base OD Adjustable Pole Weight: Lamp Only - 5 Lbs Lamp and Pole - 8 Lbs Meets Marine Standards for Fresh / Saltwater Use Total Watts: 36 watts UV and Weatherproof Voltage: 12V DC 12V DC Operation Lighting Configuration: Spot Beam Amps: 3 Amps Mounting: Telescoping Pole Mount w/ Surface Mounting Bracket Included Wiring: 16` Coil Cord w/ Cig Plug, Battery Clamps, or Ring Terminals Total Lumens: 2,520 Special Orders- Requirements Lamp Color Temperature: 6000 Kelvin Contact us for special requirements Weather Rating: Weatherproof Toll Free: 888-325-4448 Movement Range: 135¡ Tilt - 370¡ Rotation Fax: 1-903-498-3364 Remote Control: Single Wireless, Handheld Radio Control - 433 MHz E-mail: [email protected] Down to Purchase-