Larson Electronics 15 KVA Power Distribution System - 440V to 120V 1PH - (3) 480V + (6) 120V GFCI Duplex Receptacles

Made in the USA The Larson Electronics MGS-3X440V.30A-15KVA-6X120.20A power distribution substation converts 440V AC electrical current into 120V AC single phase. This unit provides operators the ability to safely tap into and distribute 440V AC power from a variety of sources including generators and direct grid power. The MGS-3X440V.30A-15KVA-6X120.20A portable power distribution system gives operators the ability to power their 480 volt and 120 volt equipment from a single system. On the primary side, operators connect 440 volt line-in power via 100` of 2/4 SOOW cord to three L16-30R, 480V receptacles for 480V equipment. On the secondary side, operators connect to six GFCI duplex 120V receptacles for 120V equipment. Operation: A 100` 2/4 SOOW line-in cord brings 440V power to the NEMA 3R 125-amp, 480V primary panel, which contains one 40-amp breaker protecting the 30 KVA transformer, and three 30-amp, 480V breakers protecting three 30-amp, L16-30R, 480V receptacles, and passes 440V through to the transformer. The NEMA 3R 15 KVA transformer converts 440V power to 120V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 125-amp, 120V main lug only panel. This secondary panel contains six 20-amp, 125V breakers protecting six 20-amp, 120V GFCI duplex receptacles. All receptacles are equipped with weatherproof covers. The transformer and distribution assembly is mounted onto a rugged carbon steel frame with integrated casters to allow easy transport. The standard frame constrution is 1/4" thick, 2" square tubing frame. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customers needs. This power distribution system is designed for outdoor use and applications including but not limited to, plant maintenance, hazardous location operations, as a welding station, shows, exhibits, and marine applications. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build portable power distribution systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-3X440V.30A-15KVA-6X120.20A Power Distribution System Ratings Line-In Cord: 100` 2/4 SOOW Cord Max OCP Primary: 125A @ 440V Line-In Cord Cap: - Max OCP Secondary: 125A @ 120V Primary Voltage: 440V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: - NEMA 3R Indoor / Outdoor Use Primary Panel: 480V 125A N3R Panel Made in the USA Primary Breakers: (3) 30A, (1) 40A Primary Receptacles: (3) 30A L16-30R [480V] Primary Protection: Weatherproof Covers Transformer: 15 KVA 440V to 120V 3PH N3R Secondary Voltage: 120V 1PH Secondary Panel: 120V 125A MLO N3R Secondary Breakers: (6) 20A Secondary Receptacles: (6) 20A 120V GFCI Duplex [120V] Secondary Protection: GFCI Special Orders- Requirements Form Factor: Square cube frame, casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Weight: 650 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase