Larson Electronics 10KVA Temporary Power Distribution - 480V to 120/240V 1PH - (10) 120V Duplex GFCI Receptacles

Made in Texas The Larson Electronics MGL-10KVA-480-120-10X120.20-M2 temporary power distribution system converts 480VAC electrical current into single phase 120/240VAC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGL-10KVA-480-120-10X120.20-M2 temporary power distribution system gives operators the ability to power their 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power via 25` of #10 SOOW cord. On the secondary side, operators connect to ten duplex GFCI receptacles for 120V equipment. Operation: A 25` #10 SOOW line-in cord brings three phase 480V AC power to the NEMA 3R 30-amp 480V three phase primary disconnect, which contains two 30-amp time delay fuses, and passes 480V single phase through to the transformer. The NEMA 3R 10KVA transformer converts 480V to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp 120/240V single phase main lug only panel. This secondary panel contains ten 20-amp breakers protecting ten duplex GFCI 120V receptacles. Protective Construction: The transformer and load center/distribution assembly is mounted to a powder coated steel, dolly cart style, frame resulting in an extremely stable, durable, and mobile power distribution platform. Two run-flat rubber tires and a dolly cart style mounting platform provides easier substation mobility, and a center point lift point allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Units are available up to 150KVA, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits and shipyard operations. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGL-10KVA-480-120-10X120.20-M2 -Temporary Power Distribution System Ratings Line In: 25’ #10 SOOW Cord UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480VAC 3PH NEMA 3R Indoor or Outdoor Use Primary Disconnect: 30A 480V 3PH Fused @ 30A Made in the USA Primary Protection: Disconnect Transformer: 10KVA 480V to 120/240V 1PH N3R Secondary Voltage: 120/240VAC 1PH Secondary Panel: 100A 120/240V 1PH MLO N3R Panel Secondary Breakers: (10) 20A Secondary Outlets: (10) Duplex GFCI [120V] Secondary Protection: GFCI Form Factor: Powder Coated Steel Dolly Cart w/ Run Flat Tires Dimensions: W-32" X D-40" X H-56" Special Orders- Requirements Weight: 350 lbs Contact us for special requirements Features: Toll Free: 888-325-4448 Max Primary OCP: 30 amps @ 480V Max Secondary Output: 41.7 amps @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase