Larson Electronics 100W Explosion Proof LED Wall Pack Light w/ Glare Shield - Surface Mount- 11,667L - C1D1 - Photocell

Made in the USA The EPL-WPLED-100W-RT-PSC-DNS from Larson Electronics is an Explosion Proof LED Wall Pack Light Fixture with Day/Night Photocell and Glare Shield that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. An adjustable glare shield allows operators to block all upward light. When ordering this unit, please choose from the following voltage options: 120V AC, 208-277V AC, 12V DC, or 24V DC. This Class I Division 1 & 2, Class II Division 1 & 2 explosion proof LED wall pack light fixture provides 11,667 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The adjustable glare shield allows operators to adjust the cutoff of this wallpack, and prevents upward wasted light. The explosion proof wall pack LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This light is universal voltage capable and can be operated with 100-277V AC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. Day/Night Photocell: The EPL-WPLED-100W-RT-PSC-DNS is equipped with an explosion proof day/night photocell. The 400-watt rated unit automates dusk-to-dawn lighting controls by turning on compatible lights at 3 footcandles and off at 8 footcandles. Featuring a solid-state design, the device is suitable for use in hazardous locations, indoor/outdoor spaces and industrial facilities. The photocell promotes safety by turning on outdoor luminaires in critical passageways at night. During operation, the field-installable device activates luminaries at 3 footcandles, while deactivating at 8 footcandles. With an electrical range of 35 watts to 400 watts, the unit is compatible with HID, incandescent and fluorescent lights. To prevent accidental tripping, the device comes with a 10-second time delay feature. The explosion proof photocell may also be used to conserve energy by only activating the luminaries when necessary. The EPL-WPLED-100W-RT-PSC-DNS light produces 11,667 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPL-WPLED-100W-RT-PSC-DNS offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a trunnion mount wall/flat surface bracket. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-WPLED-100W-RT-PSC-DNS - Explosion Proof LED Wall Pack Ratings/Approvals Lamp Type: Cree LED Class I Division 1, Groups C and D Dimensions: 18"H x 16"W 6"D Class I Division 2, Groups C and D Weight: 35 lb Class II, Divisions 1 & 2, Groups E, F and G Voltage: 120V AC, 208-277V AC, 12V DC, or 24V DC Class III, Divisions 1 & 2 Total Watts: 100W T5 Temperature Rating Lumens: 11,667 Certified to UL844 and C22.2 Standards Luminous Efficacy: 116.67 Lm/W Paint Spray Booth Approved Lighting Configuration: Flood Pattern LEL Approved Temp Rating: -50¡C to +85¡CC IP67 Rated Waterproof Color Temp: 5000K, 4000K, 3000K Multiple Driver Banks Color Rendering Index: >75 80% Lumen Retention after 60,000 Hours Lamp Life: 60,000+ Hours Adjustable Glare Shield Mounting:Adjustable wall / flat surface mount Day/Night Photocell LED Driver Specs Input Voltage: 100-277 Volts AC Input Current: 1.8A Max Special Orders- Requirements Power Factor: >98% Contact us for special requirements Efficiency: >88% Toll Free: 888-325-4448 Output Voltage: 54V Max Intl: 1-214-616-6180 Output Current: 2.1A E-mail: [email protected] -Scroll Down to Purchase-