Larson Electronics 100W Explosion Proof LED Wall Pack Light w/ Glare Shield - Surface Mount - 11,667 Lumens - C1D2

Made in the USA The Larson Electronics EPLC2-WPLED-100W-RT-PSC Explosion Proof LED Wall Pack Light fixture with glare shield provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. An adjustable glare shield allows operators to block all upward light. This Class I Division 2, Class II Division 1 & 2 explosion proof LED wall pack light fixture provides 11,667 of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The adjustable glare shield allows operators to adjust the cutoff of this wallpack, and preventing upward wasted light. The explosion proof wall pack LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This light is universal voltage capable and can be operated with 100-277V AC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. The EPLC2-WPLED-100W-RT-PSC light produces 11,667 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The EPLC2-WPLED-100W-RT-PSC offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a trunnion mount wall/flat surface bracket. High Quality Features Superior LED Benefits 1. Low power consumption.2. Instant on/off operation.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Superior color rendering compared to HPS, LPS, MH.5. Retains 80% lumen output after 60,000 operating hours. 6. Powder coated aluminum fixture body. 7. Pendant and Swivel Bracket mount included8. Low profile - Light weight9. 11,667 Lumen output from only 100 watts10. Multiple LED Driver Banks for Redundancy11. Paint Spray Booth Approved12. LEL Approved for Rebates 1. 60,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information EPLC2-WPLED-100W-RT-PSC - Explosion Proof LED Wall Pack Ratings/Approvals Lamp Type: Cree LED Class I Division 2, Groups C and D Dimensions: 18"H x 16"W 6"D Class II, Divisions 1 & 2, Groups E, F and G Weight: 35lbs Class III, Divisions 1 & 2 Voltage: 100-277 Volts AC, 50/60Hz or11-25 Volts AC/DC T5 Temperature Rating Total Watts: 100W Certified to UL844 and C22.2 Standards Lumens: 11,667 Paint Spray Booth Approved Luminous Efficacy: 116.67 Lm/W LEL Approved Lighting Configuration: Flood Pattern IP67 Rated Waterproof Temp Rating: -50¡C to +85¡C Multiple Driver Banks Color Temp: 5000K, 4000K, 3000K 80% Lumen Retention after 60,000 Hours Color Rendering Index: >75 Adjustable Glare Shield Lamp Life: 60,000+ Hours Mounting:Adjustable wall / flat surface mount Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Intl: 1-214-616-6180 Fax: 1-903-498-3364 E-mail: [email protected] Down to Purchase-