Larson Electronics Single Head LED Telescoping Light Tripod - 3.5 to 10 feet - 120 Watts - Adjustable U-Bracket

Made in the USA The Larson Electronics WALTP-P10W-1X120X2ET-1227 Tripod Mounted LED Light consists of a 120 watt LED light mounted atop an aluminum tripod and produces 10,320 lumens that can illuminate an area over 875`L x 100`W. The heavy duty aluminum tripod mount provides the ability to easily and quickly deploy these lights and extend them to any height between 3.5 and 10 feet. An included inline transformer allows operation with common 120-277 VAC wall outlet current. This LED light tower has an inline switch for on/off control and can be operated with either 120-277 VAC or 12/24 VDC. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS* This single LED light tripod is fitted with an LED light head that produce 10,320 lumens while using 120 watts at 1 amp. The LED light head contains twelve CREE XLamp MC-E¨ Emitters producing 860 lumens each combined with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage (875`L X 100`W Spot Beam). We also offer optional floodlight versions with 40 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED lights are waterproof and have IP68 rated construction that is designed to withstand demanding environmental and operating conditions. These units can withstand frigid temperatures, are waterproof to three meters, and resist the ingress of dust, dirt and humidity. The housings on these units are formed from cast aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E¨ LED Emitters offer high resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Both LED fixtures are mounted to a single removable mounting bracket that can be easily detached from the tower for stowing or transport. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Click to Enlarge Durability: The WALTP-P10W-1X120X2ET-1227 Tripod Mounted Single LED Light incorporates an IP68 rated LED light emitter on a collapsible aluminum tripod. The weatherproof LED lights have a durable powder coat finish, are IP68 rated waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications Mounting: The LED light head on this unit is mounted to a single removable bracket that allows the user to simply remove the entire light assembly from the tripod for easy stowing and transport. The LED light can be adjusted through a full range of motion to provide precise maximum coverage of the workspace. Tripod: The heavy duty aluminum tripod is durable, lightweight and adjustable to any length between 3.5 feet and 10 feet. A single mounting bracket holds the LED light and allows each light to be adjusted and aimed independently of the other. This adjustability allows users to expand the area covered or to focus more intense coverage on a smaller area. The tripod legs can be collapsed and the light head bracket removed with the lights still on it for simple portability and deployment. The heavy duty construction of this tripod and the light weight of the aluminum LED fixture results in a portable yet very stable lighting platform that will hold its position, even in very windy conditions. The tripod weighs 8 pounds and the LED light head and attachment bracket weigh 9 pounds. The adjustable tripod is constructed of heavy duty aluminum with stainless steel hardware and provides secure height adjustment, leg positioning, and light mounting that will hold position even in windy conditions. Power: These LED tower lights are equipped with an inline transformer that allows operation with standard 110-120 VAC household current. Alternatively, operators can disconnect the transformer and power these lights directly from 12 to 24 volt DC power sources as they can operate natively with DC current ranging from 9 to 32 VDC. You do not need to anything special to operate these light bars in their multi-voltage 9-32 Volt configuration. They will sense the incoming voltage and adapt accordingly. This tower is equipped with a waterproof single switch controller that allows operators to power the lights on or off without having to unplug the tower. We also offer a dual switch configuration which allows operators to operate each light independently of the other or in tandem. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This Tripod Mounted Dual LED Light is equipped with 16 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Versatility: The easy deployment and multi-voltage capability of this light tower makes it ideal for rapid deployment as a scene light for first responders to downed lines, main breaks or accidents. Other applications include temporary maintenance operations, tank cleaning, power washing and other maintenance applications where general area lighting is not available. Temporary event organizers will find value in these tripod mounted telescoping HID lights for general area lighting in outdoor arenas where temporary power distribution is unavailable or expensive. Unlike our larger metal halide towers, these LED lights can be positioned next to the users. While our larger WAL-C-2XM 2000 watt metal halide lights on telescoping tripods cover more area, they are typically paired with large portable electrical distribution panels, transformers or diesel generators. The noise, fumes and high wattage electrical cabling usually requires that the operator positions the portable light tower at some distance from the work area or event. While these LED light towers produce less light coverage than the large metal halide lights, they can be placed right next to the work area, event or operators, so the overall effective illumination will be greater. Specifications / Additional Information WALTP-P10W-1X120X2ET-1227 LED Light Tower WALTP-P10W-1X120X2ET-1227 Features Lamp Type: CREE XLamp MC-E¨ LED IP68 Rated Weatherproof & Waterproof Dimensions: Telescoping- 3.5` to 10` Adjustable Tripod Extends 3.5` to 10` Total Watts: 120 Multi-Voltage 120-277 VAC, 9-32 VDC Lumens: 10320 Inline Switch Voltage: 110VAC with Transformer, Multi-Voltage- 9-32VDC Without Amps: 1 @ 120VAC; 10 on 12 VDC; 5 on 24VDC Mounting: Heavy Duty Aluminum Telescoping Light Tower Lighting Configuration: 35¡ Flood or 10¡ Spot Light Color Temp: 6000K Life Expectancy: 5000 Hours Wiring: Inline, Water-Proof Switch, Inline Transformer, 16` 16/3 SOOW cable Special Orders- Requirements Cord Cap: 5-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Contact us for special requirements Unit Weight: 24lbs Total Toll Free: 1-800-369-6671 Spot Beam: 875`L x 100`W Fax: 1-903-498-3364 Flood Beam: 250`L X 225`W E-mail: [email protected] CE Certified 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-