Larson Electronics 60 Watt Color Changing LED Flood Light on Telescoping Tripod - Extends 3.5' to 10' - 120-277V AC

The WAL-TP-1X600RGB-25C LED light tower extends from 3.5` to 10` and provides high intensity output and telescoping tripod tower versatility for operators looking for an economical yet effective alternative to quartz halogen tripods. The LED light head on this extendable tripod tower produces illumination comparable to a 500 watt quartz work light without the high heat, fragile construction, or high energy use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS* The WAL-TP-1X600RGB-25C LED light tower from Larson Electronics produces a wide flood beam of light while drawing only 60 watts @ 0.5 amps on a 120 volt AC power source. The light assembly consists of one color changing LED wall pack light with forty-five LEDs, paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood light. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. The WAL-TP-1X600RGB-25C portable tripod consists of an LED light head mounted atop a telescoping tripod tower. This color changing LED flood light is an RGB unit, meaning it can produce red, green and blue light of varying levels and intensity. Operators scroll through various colors by using an included handheld remote. This LED light is also dimmable, and can be set to operate in different modes including steady burn, flash, strobe, color fade, and smooth fade. Users can also turn the lamp on/off via remote control. This floodlight has internal memory and will remember the last set configuration when power is cut via light switch or unplugging the lamp. This high output LED flood light is an ideal replacement for high temperature incandescent, fluorescent, and metal halide lamps without fragile design, high energy consumption, and need for colored filters or special coatings as seen with traditional lighting. The WAL-TP-1X600RGB-25C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. Each LED chip contains individual red, blue, and green diodes to produce a full spectrum of color choices. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Remote Control: The remote control included with this multi color LED lamp is a wireless control unit with a working distance of 25 feet. This remote control capability is ideal for operators who install these LED flood lights in hard to reach or elevated locations, allowing them to change the color and operating modes of the lamp quickly and easily. Durability: The heavy duty aluminum tripod is durable, lightweight and adjustable to any length between 3.5` and 10`. The tripod legs collapse and the light head bracket is removable for simple portability and deployment. The heavy duty construction of this tripod and the light weight of the LED light heads help to make this a very stable unit, even in windy conditions. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: The LED lamp is equipped with male and female cord caps connected via 25` 16/3 SOOW cord. Each cord cap is rated for 15 amps. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mounting: Mounting hardware for the color changing LED head consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. Applications: There are several applications for this telescoping LED light tower. This LED light can be easily stored and carried in a work truck for rapid deployment as a scene light for first responders to downed lines, main breaks, or accident scenes. Other applications include temporary maintenance operations, tank cleaning, power washing and other maintenance applications where general area lighting is not available. Temporary event organizers will find value in these telescoping LED lights for general area lighting in outdoor arenas. Specifications / Additional Information WAL-TP-1X600RGB-25C LED Light Tower WAL-TP-1X600RGB-25C Features Lamp Type: LED Waterproof/Vapor Proof Dimensions (Light Head): 9"W x 3.25"D x 6.5"-H Operates on Standard 110-270 VAC Dimensions (Tripod): Telescoping 3.5` to 10` Impact/Vibration Resistant Construction Watts: 60 50,000+ Hour LED Life Lumens: 5400 Color Changing LED Flood Light Voltage: 100-277 Volts AC 50/60 Hz Extendable Tripod 3.5` to 10` Lighting Configuration: Flood - Steady, Strobe, Flash Cycle ETL Approved for Wet Locations LED Light Color: Color Changing: Red/Green/Blue LED Life Expectancy: 50,000 Hours Amps: 0.5 @ 120V Special Orders- Requirements Mounting: Light Head- Adjustable Bracket Tripod- Extendable 3.5 to 10 Ft Height Contact us for special requirements Materials: Aluminum Housing, Polycarbonate Lens Toll Free: 888-325-4448 Wiring: 25` 16/3 SOOW cord Cord Cap: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-