Larson Electronics *RENTAL* Explosion Proof Fluorescent Light - Class 1 Div.1/Class 2 Div 1- 12/24VDC *RENTAL*

Made in the USA This unit is for rentals. Please The Larson Electronics RNT-EPL-48-2L-LV 12V/24V Explosion Proof Fluorescent Light Fixture is U.S./Canada UL Listed Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The RNT-EPL-48-2L-LV fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications and a good choice for use in applications requiring a low voltage source of illumination. This T6 temperature rated fixture comes standard with two F32T8-841 fluorescent lamps which produce a combined 5,900 lumens of light. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is available with a variety of lamp options. The RNT-EPL-48-2L-LV provides operators in hazardous locations with a reliable and affordable low voltage lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability. Click Photo to Enlarge NOTE ON LAMPS: All hazardous location lights are shipped with bulbs. This fixture comes equipped with F32-T8/841 32 Watt lamps producing 2950 lumens per bulb, 24,000 hours of service life and a 4100 Kelvin color. The RNT-EPL-48-2L-LV has an electronic ballast and only works with 12 or 24 volt lamps. Please specify your desired voltage option from the drop down menu below when ordering. Energy Consumption Comparison T5HO T8 LED Wattage 108 watts 64 watts 48 watts Amp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 amps Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 amps Amp Draw @ 12V DC 9 amps 5.34 amps 4 amps Amp Draw @ 24V DC 4.5 amps 2.67 amps 2 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Color Temperature 5000K / 4100K 4100K 5300K Operation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $15.42 Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the surface bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection. F32T8-841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8) Click here to see the LED version of this light Specifications / Additional Information RNT-EPL-48-2L-LV Explosion Proof U.L. Ratings UL Listing: United States - Canada Class 1 Division 1, Groups C and D Dimensions: W-11.25" L-52" H-8.5 " Class 1 Division 2, Group A,B,C,D Weight: 65 Lbs UL 595 Outdoor Marine Type (Saltwater) Total Watts: 64 watts UL 844, 924 Voltage: 12V - 24V UL 1598 Marine Type Total Lumens: STD-F32T8-841 Bulbs 5,900 Class II Division 1- 2, Groups E,F,G Lamp Life Expectancy: STD-F32T8-841 Bulbs 24,000 Hours UL Certified Canadian Standards Efficiency: STD-F32T8-841 Bulbs 92 Lumens per Watt UL listed for Paint Spray Booths* Ambient Operating Temp Range: -30 C to 70 C California Title 24 Compliant Beam Angle: N/A Color Temp: 4100K- F32T8-841 Bulbs Special Orders- Requirements Mounting: Bracket Standard - Pendant Optional Wiring Hub: 1/2 inch threaded Toll Free: 888-325-4448 U.L Approval: U.S Certificate Canada Certificate Maximum Case Temp: 90 C E-mail: [email protected] Operating Temp Rating: T6 Rated Minimum Operating Temp: -30 C Rental Type: Monthly, Weekly, Daily View a Photometric Graph of the EPL-48-2L Bulb Types *Substitution of included standard bulbs for higher output lamps may affect paint spray booth approval.*Wattage totals are lamps only and may vary with different lamps. Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental prices for the RNT-EPL-48-2L-LV;Monthly...$199.00 USDWeekly...$120.00 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Please note: 3 day lead time on this light.