Larson Electronics 12 / 24 Volt Explosion Proof Fluorescent Light - Class 1 Div 1 & Class 2 Div 1 Ratings

$1,159.80
(No reviews yet) Write a Review
SKU:
EPL-48-2L-LV
Weight:
0.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Made in the USAThe Larson Electronics EPL-48-2L-LV 12V/24V Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. Click here to see the LED version of this lightThe EPL-48-2L-LV fixture is a 4 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications and a good choice for use in applications requiring a low voltage source of illumination. This T6 temperature rated fixture comes standard with two F32T8-841 fluorescent lamps which produce a combined 5,900 lumens of light. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.This fixture is multi-voltage capable and is available with a variety of lamp options. The EPL-48-2L-LV provides operators in hazardous locations with a reliable and affordable low voltage lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge NOTE ON LAMPS: All hazardous location lights are shipped with bulbs. This fixture comes equipped with F32-T8/841 32 Watt lamps producing 2950 lumens per bulb, 24,000 hours of service life and a 4100 Kelvin color. The EPL-48-2L-LV has an electronic ballast and only works with 12 or 24 volt lamps. Please specify your desired voltage option from the drop down menu below when ordering. Energy Consumption Comparison T5HO T8 LED Wattage 108 watts 64 watts 48 watts Amp Draw @ 120V AC 0.9 amps 0.54 amps 0.4 amps Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.18 amps Amp Draw @ 12V DC 9 amps 5.34 amps 4 amps Amp Draw @ 24V DC 4.5 amps 2.67 amps 2 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Color Temperature 5000K / 4100K 4100K 5300K Operation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $15.42 Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations. Surface Mount (Standard) Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Pendant Mount (Optional) 3 Conduit Positions Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture. Made in USA Quality Lamp Options 1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection. F32T8-841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8) Specifications / Additional Information EPL-48-2L-LV Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and DDimensions: W-11.25" L-52" H-8.5 " Class 1 Division 2, Group A,B,C,DWeight: 65 Lbs NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Total Watts: 64 watts NRTL Certified to UL 844, 924Voltage: 12V - 24V NRTL Certified to UL 1598 Marine TypeTotal Lumens: STD-F32T8-841 Bulbs 5,900 Class II Division 1- 2, Groups E,F,GLamp Life Expectancy: STD-F32T8-841 Bulbs 24,000 Hours Certified to Canadian StandardsEfficiency: STD-F32T8-841 Bulbs 92 Lumens per Watt Listed for Paint Spray Booths*Ambient Operating Temp Range: -30 C to 70 CCalifornia Title 24 CompliantBeam Angle: N/A Color Temp: 4100K- F32T8-841 Bulbs Special Orders- RequirementsMounting: Bracket Standard - Pendant Optional Wiring Hub: 1/2 inch threaded Toll Free: 888-325-4448Maximum Case Temp: 90 C Intl: 1-903-270-1187Operating Temp Rating: T6 Rated E-mail: [email protected] Operating Temp: -30 C ? View a Photometric Graph of the EPL-48-2L Bulb Types *Substitution of included standard bulbs for higher output lamps may affect paint spray booth approval.*Wattage totals are lamps only and may vary with different lamps.