Larson Electronics *RENTAL* Class 1 Div. 2 & Class 2 Div. 1 400 Watt Metal Halide Light - Ceiling or Pendant Mount

Made in the USA *RENTAL UNIT* The RNT-EPLC2-400MH metal halide, hazardous area light fixture from Larson Electronics produces 34,000 lumens of light capable of illuminating an area approximately 18.000 square feet in size. Weather proof and U.L. listed for marine use, this metal halide fixture is available in pendant, ceiling or wall mount versions and is an ideal choice for industrial applications and use in enclosed spaces. The durable RNT-EPLC2-400MH metal halide fixture from Larson Electronics is approved for use in wet marine locations and is ideal for industrial applications, confined spaces, hazardous work areas and Class 1 DIV 2 areas where a powerful and durable floodlighting solution is needed. The lamp housing is weatherproof and constructed of non-sparking aluminum featuring a heavy duty, mogul base lamp socket, tempered and heat resistant glass dome and cast aluminum dome guard. This lamp carries a long lamp life rating of 60,000 hours and a fast hot restrike capability, reducing downtime and replacement costs.This unit is available in pendant, ceiling and wall mount versions and includes stainless steel exterior hardware for added resistance to the salt water conditions found in marine environments. Click Photo to Enlarge This hazardous area light is U.L. rated Class 1 Division 2, Groups A, B, C and D and UL1598 listed for outdoor marine use. The integral multi-tap ballast is protected within the weatherproof housing and can be operated on 120, 208, 240 and 277 Volts. This lamp is suitable for use in confined spaces and areas where wet marine conditions exist. The multi-purpose floodlight design of this fixture makes it a popular choice for industrial and marine applications regardless of whether the locations are designated hazardous or not. The non sparking aluminum fixture body is electrocoated for durability and corrosion resistance while a tempered glass globe protected by an aluminum globe guard provides lamp security against impacts and the elements. Wiring: This light is highly durable and produces high 34,000 lumen light output in a wide flood pattern. Wiring is through a convenient _ inch NPT conduit entrance. Three-conductor No. 14 cable (with 90¡ C minimum insulation) is recommended for making electrical connections. Wiring is accomplished through the wiring enclosure provided on the fixture. The box is provided with a size 3/4-in. NPT threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code). Suggested applications: ship yards, boat yards, plants, tanks, vessels, fuel cells, barges and oil field applications. Made in the USA Quality Metal Halide Benefits 1. High Efficiency Metal Halide lamp.2. 90 Lumens per Watt.3. Rugged Die Cast Aluminum Lamp Housing.4. Shock Resistant Tempered Glass.5. Heavy Duty Gasket.6. Socket: Mogul Base. 7. Low Maintenance.8. Corrosion Resistant Marine Approved.9. Stainless Hardware. 10. UL Listed for Marine Environments. 1. Long lamp life.2. High efficiency and low amp draw after initial startup.3. High durability and reliability.4. High output and very good color rendering.5. Vibration and shock resistant.6. Low maintenance. Specifications / Additional Information RNT-EPLC2-400MH Explosion Proof Metal Halide U.L Ratings Lamp Type: Metal Halide Class 1, Division 2 Groups A,B,C,D Lamp Dimensions: 21 1/2"-L, 13"-OD, Class 1 Zone 2 -Groups IIA, IIB, IIC Ballast: Pulse Start / Multi-Tap Class 2, Division 1 & 2, Groups E,F,G Watts: 400 NEMA 4x, IP66, NEMA 9 Lumens Per Watt: 90 UL 1598 Marine Voltage: Multi-Tap -120, 208, 240 and 277 Volts UL 844 Lighting Configuration: Flood Pattern Suitable for Wet Locations Mounting: 3/4" Ceiling, Wall or Pendant mount U.L. Listing: Class1 DIV 2 Groups A,B,C,D Total Lumens: 34,000 Special Orders- Requirements Wiring: 3/4 inch Conduit Contact us for special requirements Temp Rating: 165C-T2A Toll Free: 888-325-4448 Rental Type: Monthly, Weekly, Daily Fax: 1-903-498-3364 E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental prices for the RNT-EPLC2-400MH-REN; Monthly...395.00 USD Weekly...263.33 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping, repairs, and excessive cleaning, if needed.