Larson Electronics *RENTAL* 640W LED Light Tower- 6.7'-20' - Telescoping Fold Over- Balloon Light Alternative- 50' Cord

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
This unit is for rental. The RNT-LM-SMWB-20-6.75-5S-4X48.160W-LED-50C from Larson Electronics is a Skid Mounted Fold Over LED Light Tower which provides a safe and effective way for operators to quickly deploy 640 watts of intense LED lighting to elevations up to twenty feet. Equipped with four, 4` diffused LED fixtures in a downward, `X` configuration, this LED light tower is mounted onto a skid base and folds over for easy transportation and includes 50 feet of 16/3 SOOW cord with a general-application cord cap for completing electrical connections. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The RNT-LM-SMWB-20-6.75-5S-4X48.160W-LED-50C is designed to quickly and safely deploy 640 watts of intense LED lighting in locations where elevated illumination is needed for maximum area coverage. This light boom can be extended to 20 feet for maximum area coverage and collapsed to 6.7 feet for applications where a footprint smaller is required. This LED light tower features a 50-foot 16/3 SOOW cord with a choice of general-application cord cap. The mast is elevated using an included 1,000 lbs hand winch with 3/16 inch cable and extended to its full height using a second 1,000 lbs winch. A suitable replacement for balloon light towers, this unit consists of four, 4` LED fixtures with diffused illumination. Positioned downward and in an `X` pattern, the lamps illuminate the ground, which reduces the possibility of blinding. Compared to conventional balloon light masts, this LED light tower is highly efficient (doesn`t waste a lot of light during operation). When in use, the entire LED lighting system consumes a total of 640 watts (160 watts per lamp), while offering 76,800 lumens (19,200 lumens per lamp) of white light with a color temperature of 6,000K. Featuring a 160¡ wide flood beam spread, the fixtures can be adjusted vertically for robust control of the area covered. The LED lamps are housed in aluminum casings and protected by shatter-resistant polycarbonate lenses. This multi-voltage unit operates on 120-277V AC without modifications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Wiring: The LED light mast is equipped with 50 feet of 16/3 SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include the following: 5-15P, 5-20P, L5-20P, L6-20P or L6-30P. Mounting: This light mast is mounted to a 6` skid base, which allows operators to secure the unit on truck beds 6` in length (tied down via slots at each corner). The light tower can also be removed and skid mounted on a concrete pad for deployment at work sites. For ease of deployment, the light heads can be removed. The four side skid pockets enables fork lifts and skid steers to transport this unit from all sides. A support arm at the end of the skid supports the mast in the collapsed position. The weighted base allows this mast to be deployed without permanently mounting the mast, and includes anchor holes to anchor the unit down for long term deployment. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 6.7 feet, the mast can withstand winds up to 125 mph. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light tower weighs approximately 600 lbs, can easily support and lift 150 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5 feet long, 4 feet wide, 5 feet tall and weighs approximately 1200 lbs. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Applications: Road construction, MRO, outdoor maintenance, public repair projects, outdoor illumination, security checkpoints, construction sites, roadside operations, balloon light tower replacement and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information RNT-LM-SMWB-20-6.75-5S-4X48.160W-LED-50C Three Stage LED Light Tower Mast Summary Lamp Type: LED 6.7` to 20` Light Mast Mast Length: 6.7` to 20` Steel Construction Weight: +-600 lbs Powder Coated Finish Voltage: 120-277V AC Removable Mast Head Total Watts: 640W (250W per lamp) 125 mph Wind Resistance Total Lumens: 76,800 lms (19,200 lms per lamp) Manual or Optional Electric Operation Luminous Efficiency: 160 lm/w (4) 4` Diffused LED Lamps LED Life Expectancy: 50,000+ hours 80% Lumen Retention @ 50,000+ Hrs Beam Angle: 160¡ Replacement for Balloon Light Towers Color Temp: 6000K Vapor Proof LED Drive %: 90% Vibration Shock Resistant Power Factor: >0.95% IP65 Rated Waterproof Ambient Temp Rating: -30¡C to +60¡C Outdoor Approved Materials: Aluminum Housing, Polycarbonate Lens, Steel Tower Finish: Powder Coated - Gloss Blue Mount: 6` Skid Base - Truck Beds or Skid Mount Operation: (2) 1,000lbs Hand Winches, Electric Optional Cable: 3/16 Aircraft Grade Galvanized Steel Cable Special Orders- Requirements Wiring: 50` 16/3 SOOW Cord w/ Cord Cap Contact us for special requirements Cord Cap Options: 5-15P, 5-20P, L5-20P, L6-20P or L6-30P Phone: 1-214-616-6180 Shipping Weight: +-800 lbs Toll Free: 888-325-4448 Shipping: Common Freight Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected] Rental Prices for the RNT-LM-SMWB-20-6.75-5S-4X48.160W-LED-50C Monthly..$1972.66 USDWeekly....$986.33 USDDaily....$295.90 Scroll Down to Purchase