Larson Electronics *RENTAL* 4000 Watt Pneumatic Light Tower - Extends to 18 Feet - Four 1000W Metal Halide Lamps *RENT*

Made in USA *This unit is for rentals. Please scroll down for rental rates* The RNT-PLM-18-4X1000W Pneumatic Light Tower from Larson Electronics is an 18 foot extendable light tower equipped with four metal halide light fixtures producing approximately 110,000 lumens each. The four 1,000 watt metal halide lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The RNT-PLM-18-4X1000W telescoping pneumatic light tower allows operators to quickly and safely deploy 4,000 watts of metal halide lighting in locations where elevated illumination is needed for maximum area coverage. This six section light boom can be extended to 18 feet for maximum area coverage and collapsed to 8 feet for stowage. A locking top mounting plate allows operaters to easy removal of lights for storage or transport. The mast is elevated using an included 250 watt 220 Volt AC 50/60hz, 1/3 horsepower air compressor. An air release valve located at the base of this pneumatic mast allows operators to lower the tower. Included with this light tower are four of our wet area suitable HID-22-SL-rem metal halide fixtures producing a combined total of approximately 440,000 lumens at 4,000 watts. These lamps have 19” reflectors and are constructed of aluminum with a clear tempered glass lens which is secured into place with a heavy duty gasket and single ring lock. These floodlights produce a wide flood light pattern capable of illuminating approximately 5 acres. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. All wiring runs through the mast, meaning no loose wires when the tower is collapses. These light masts are typically mounted to trailers or other stable surfaces via a 12 inch square, 1/2 inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the four metal halide fixtures. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power. We also offer an alternative choice of conventional electric or manually operated towers equipped with winches for raising and lowering. Call us at 888-325-4448 or contact us [email protected] to discuss any special custom ordering requirements. Suggested Applications: Construction sites, event lighting, emergency services, highway projects, industrial plants, mining, excavation, natural disaster relief, environmental cleanup, and anywhere a mobile light source with large area coverage capability is needed. Specifications / Additional Information RNT-PLM-18-4X1000W Pneumatic Light Tower Quick Summary Length: 8 feet - 18 Feet 8.5 - 30 Ft Extendable Mast Lamps: Four 1000 Watt Metal Halide Pneumatic Operation Lumens: 440,000 lbs Electric Air Pump Operation: Pneumatic Mast - Electric Air Pump Lights- UL 1572 & Wet Area Suitable Mounting:1/2" thick, 12 inch Square, Four Hole Bracket Shipping: Common Freight Special Orders- Requirements Shipping Weight: 380 lbs Contact us for special requirements Options: Length- Mounting-Fixtures/ Call Us for Special Requirements Phone: 1-903-270-1187 Weight: 300 lbs Toll Free: 888-325-4448 Capacity: 150 lbs Fax: 1-903-498-3364 Rental Type: Monthly, Weekly, Daily E-mail: [email protected] Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental prices for the RNT-PLM-18-4X1000W:Monthly...$714 USDWeekly...$510 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Purchase-