Larson Electronics *RENT* 150W Explosion Proof LED Light - 5'H x 24"W Base Stand Mount - C1D1 - 200' 16/3 SOOW Cord

Made in Texas This unit is for rentals The RNT-EPL-24BS-5FT-1X150LED-200 from Larson Electronics is an Explosion Proof LED Light with Base Stand Mount that is rated Class I Divisions 1 & 2 Groups C & D and Class II Divisions 1 & 2 and uses a 16 inch Cree LED light head to produce 21,000 lumens of light while drawing only 150 watts. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The RNT-EPL-24BS-5FT-1X150LED-200 explosion proof LED light provides 10,000 square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a 24 inch wide four leg aluminum base and has an LED light head measuring 16 inches wide by 14 inches tall. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flamable vapors, gases and dusts may be present. Often referred to as simply a "tank light," this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a 5 foot tall base stand fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the base, passing the light head and base through the manhole separately, and then reassembling the unit once inside. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this LED light cart is 200 feet of SOOW cord, which combined with the 360° of rotation and 90° of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights. The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Click Photos to Enlarge 60° Beam Angle 125° Beam Angle 140° Beam Angle Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60° beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125° beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140° beam offers a very wide lighting pattern and is ideal for situations where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140° beam is great for situations that call for working in close proximity to lights such as in a paint booth. Click Photos to Enlarge 5-15 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: This explosion proof LED light is equipped with 200 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur. This unit is universal voltage capable and can configured to operate on 120-277 volts AC 50/60 Hz. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits 1. Approved Class I Divs 1-2 Class II Divs 1-22. LED lamp head requires no lamping.3. Durable Base Mount constructed of copper free aluminum. 4. No ballast box. No ballast to replace.5. Extreme long life LEDs reduce maintenance and replacement costs.6. Adjustable LED light head.7. 25 peel off mylar overspray lamp protectors ship with the unit.8. 21,000 Lumens produced from only 150 watts.9. Mercury free shock proof LED lamp light head. 1. 60,000+ hour lifespan.2. Can SAVE 50% or more on energy.3. 100% recyclable.4. No toxins-lead, mercury.5. No UV light, infrared radiation or CO2 emissions.6. Bright, even light maintains consistent color over time.7. Instant on/off - No flickering, delays or buzzing. 8. Very good color rendering.9. Vibration/impact resistant.10. Significantly cooler operation.11. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information RNT-EPL-24BS-5FT-1X150LED-200 Explosion Proof LED Light Ratings/Approvals Listing: United States & Canada Class I Division 1, Groups C and D Lamp Type: Cree LED Class I Division 2, Groups C and D Dimensions: 24"W x 60"H - 14" x 16" Light Head Class II Divisions 1 & 2, Groups E, F and G Total Watts: 150 Watts Class III Divisions 1 & 2 Lumens: 21,000 T5 Temperature Rating Voltage: Universal Voltage 120-277V AC, 50/60Hz NRTL Certified to UL844 and C22.2 Standards Mounting: 5` Aluminum Base Stand Paint Spray Booth Approved Weight: 30 lbs LEL Approved Operating Temp Range: T5 Rated -40°C to 65°C Multiple Driver Banks Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K 80% Lumen Retention after 60,000 Hours Color Rendering Index: >75 CRI IP67 Rated Waterproof LED Lamp Life Expectancy: 60,000 Hours Made in the USA Beam Angle: 60¡, 125¡, or 140¡ Lighting Configuration: Flood Pattern Special Orders- Requirements Beam Lux: 8500@ 1 Meter 1250@ 3 Meters Contact us for special requirements Wiring: 200 feet SOOW Cord Explosion Proof Straight Blade Plug Toll Free: 1-800-369-6671 Cord Cap Options: 5-15P or 6-20P Intl: 1-903-270-1187 E-mail:[email protected]