Image coming soon

Larson Electronics Rechargeable HID Search Light - 200lb. Magnetic Base - 4000' Spot Beam - Flood/Spot Combo - 35 Watt

(No reviews yet) Write a Review
Acro 990X-M
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
The 990X-M has 35 Watt, Xenon 4300 Kelvin bulb High Intensity Discharge (HID) bulb, 3200 lumens - produces 2700 lux at 25 feet (4 D-cell Maglite produces 280 lux at 25 feet) and 4000 foot beam. The 990X-M features a 4000 foot beam, articulating head, 200 pound grip magnetic base, focusable beam and two interchangeable batteries. This image shows a dark street, illuminated by nothing but distant street lights. This image shows the same road, this time being illuminated by the Acro 990X. Notice the white picket fence at the end of the road, approx. 3800` away being illuminated clearly by the Acro 990X. In this image, the Acro 990X in flood mode (simply twist the lens to adjust from spot to flood) is shown illuminating the dark road. 5 inch diameter magnet with 200 pounds of gripping pull attached to base of flashlight Adjustable beam from flood to spot - beam patterns show below Heavy-duty cast aluminum head with composite lower housing 70 minute run time per battery (2 batteries with come with each Acro 990X flashlight) System includes 990X light, 2 rechargeable Ni-MH 12V Rechargeable 4.5 AH Ni-MH batteries, AC charger, carrying strap and case. One battery includes an integral 200lb magnetic grip base. Charge cord plugs directly into the battery (the 990X can be in use while spare battery is charging) Head pivots from 90 to 180 degrees with the push of a button (no tools needed) Dimensions: lens is 5 inches in diameter; when positioned in the 90 degree angle, the unit stands 12 inches high and 8 inches long; when fully extended, the unit is 15.5 inches in length Lens focus ring adjusts approximately 1/4 turn for focus adjustment to beam pattern Compact ballast incorporated into lamp housing for portable, light weight use Dust and water resistant design Optional 12V car adapter* for extended run time Average current draw @12 VDC:Start: 12.2amp, Run: 3.3amp (in under 60 sec.) Average recharge time: 4 hours - For those of you looking to use an vehicle inverter to recharge the light - the batteries draw .4 amps, so a 75 watt inverter is required Weight: Flashlight with battery, 6 lbs/2.7kgComplete kit, 13 lbs 3 oz/ 5.98kg \ Easy-to-use slide on/off switch Led charging indicator on battery; red indicates charging, green indicates fully charge Over 50% less energy consumption compared to conventional lighting Professional grade unit for industrial, agricultural, law enforcement, emergency service, fire, search & rescue and marine use LUX Measurements: In SPOT At The Lens: N/AAt 10 Ft: 40,800At 15 Ft:8,200Lens Temp: 121 Degrees FHead Temp: 91 Degrees F Lux Measurements: In FLOOD At the Lens: N/AAt 10 Ft: 4,680At 15 Ft: 2,010Lens Temp: 121 Degrees FHead Temp: 91 Degrees F For those of you familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of the base easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery socket, enabling users to run the light off of a 12 volt or 24 volt vehicle`s power system indefinitely.