Larson Electronics Portable Solar/Wind 30' Light Tower - 12V 250aH Gel Cell Battery w/ Charger - 160W Wind Generator

The Larson Electronics SPLT-.53K-LM30-1XN3B-WG.-1X24AC-SGB-ACC-DTLR7 solar and wind LED light tower provides a safe and effective way for operators to quickly deploy cameras, security devices, and other equipment to elevations up to thirty feet. This solar and wind light plant features a telescoping light tower on a tandem axle trailer that folds over for easy transportation and a rotating boom that allows for 360¡ rotation. This unit contains two 265 watt solar panels and a 500aH capacity gel cell battery bank with 250aH being usable. The portable light mast also includes a 160-watt, three-blade wind generator that is capable of generating 40 kWh per month @ 13 mph winds. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This tandem axle trailer mounted light mast with solar and wind generator is designed for outdoor and remote work sites. The entire assembly is mounted onto a 7.5` tandem axle trailer, allowing operators to transport this portable light tower from location to location. Solar Powered Light Tower: This solar light tower includes two 265 watt solar panels, solar charging system, battery bank, 24V AC terminal block and manual crank up mast mounted on trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system delivers 12 volts for equipment mounted atop the 30` telescoping light mast. For times when sunlight isn`t readily available for charging, the SPLT-.53K-LM30-2XN3B-PW-1X24AC-SGB-ACC-DTLR7 also comes with a 120V or 240V battery charger that has a 30` line-in cord that is terminated in a general area cord cap. In addition, this solar tower also offers operators the ability to power or charge 24V AC devices via a 24V AC terminal block that operates at a maximum 500 VA at 24V AC. Wind Generator: The SPLT-.53K-LM30-1XN3B-WG.-1X24AC-SGB-ACC-DTLR7 is equipped with a 160-watt wind generator, which enables the unit to harvest power from air movement. Equipped with three blades, the generator is capable of producing 40kWh per month, when exposed to 13 mph winds. During start up, a wind speed of 7 mph is required. For best results, exposure to an optimum wind speed range of 10-49 mph is recommended. The device features a microprocessor-based smart controller and electronic torque control for overspeed protection. Constructed of permanent mold cast aluminum, the 12V DC unit is designed to extend the energy capabilities of the portable light mast when sunlight is unavailable. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: This solar powered LED light tower comes with a 120V or 240V battery charger that is equipped with 30 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Light Mast: This telescoping five stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy a variety of equipment in locations where it must be elevated to heights up to 30` for effective coverage. This light mast can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Solar Panel Assembly: This unit is comprised of two 265-watt solar panels, generating a total maximum output of 0.53 KW. The panels are mounted to a stationary assembly. The panels are wired to the solar charger control box which manages the charging system. The two solar panels are mounted to a frame angled at 45¡ to capture the intensity of the sun for optimized light intake. Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes locks for security purposes. Trailer Assembly: The entire assembly is mounted to a 7.5` by 7`, tandem axle trailer via six 1/2" anchor bolts. The four-wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. The trailer tongue can be removed for long term deployment. A rugged and waterproof job box is included, safely secured to the trailer. Four outriggers mounted to the corners of the trailer allow operators to level the trailer, and provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information SPLT-.53K-LM30-1XN3B-WG.-1X24AC-SGB-ACC-DTLR7 Trailer Mounted Solar/Wind Generator Light Mast Quick Summary Light Mast Specs 13.5` to 30` Light Mast Tower Length: 13.5` to 30` Steel Construction Materials: Steel Powder Coated Finish Finish: Powder Coated - Gloss Blue (4) 1,000lb Outriggers Operation: (1) 1,000lbs Hand Winch 125 mph Wind Resistance Mast Cable: 3/16" Galvanized Aircraft Cable Manual or Optional Electric Operation Cable Sheath: Sealtight Coiled Tubing A-Frame for mounted (2) 265 Watt Solar Panels Fully Solar, No Fuel Needed Solar Panel Specs 24V AC Terminal Block for Powering or Charging 24V AC Devices Panels: (2) 265 Watt panels Gel Cell Batteries for Cold Environments Method of Deployment: Fixed Mount Heavy-duty Tandem Axle Trailer System Voltage: 12 Volts Wind Generator Battery Type: Gel Cell Battery Bank: (2) 12V 8D 250aH batteries Battery Capacity: 500aH Total / 250aH Usable Battery Charger: 120V or 240V Charger Charger Wiring: 30` 16/3 SOOW Line-In w/ General Area Cord Cap Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail Wind Generator Specs Rotor Diameter: 46" - (3) Blades Weight: 13 lbs Watts: 160W System Voltage: 12V DC Energy: Approx. 40 kWh/mo @ 5.8 m/s (13 mph) Swept Area: 11.5 ft2 Startup Wind Speed: 7 mph Survival Wind Speed: 110 mph Wind Speed Operating Range: 7-49 mph Optimum Wind Speed Range: 10-49 mph Turbine Controller: Microprocessor-based Smart Controller Overspeed Protection: Electronic Torque Control Materials: Permanent Mold Cast Aluminum (Body), Injection-molded Composite (Rotor), Permanent Magnet Brushless (Alternator) Mount: 1.5" Schedule 40 Pipe (1.9" OD) Trailer Specs Trailer Type: Tandem Axle Trailer Materials: Steel Trailer Dimensions: 7.5`L` x 7`W trailer bed- 10.75 total length Hitch: 2" Ball Coupler Wiring: 7-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks Wheels: (4) 15" 5x4.5 Steel Rims Tires: ST205/75/D15 H188 Special Orders- Requirements Weight: +-600 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: 8`-L x 8`-W x 12`-H Toll Free: 1-800-369-6671 Shipping Weight: +-600 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail:[email protected]