Larson Electronics Portable LED Flood Light System - 4, 2ft. LED Bulbs - 50,000 Life Hours - 120VAC - 8640 Lumen

Buy American Compliant The Larson Electronics WAL-PFL-4LED-24-120-10 portable LED floodlight system contains four 10 watt T8 LED tubes and offers an effective alternative to string lights. This two foot long, portable LED work light produces a total of 8,640 lumens while drawing only 1 amp at 120 volts. Polycarbonate tubes encase the LED lamps and the ABS end supports are encased in rubber, resulting in a fixture that can tolerate the heavy shocks and vibrations associated with handling the lamp close to work operations. The fixture is designed to allow connecting these work lamps in a series, with a booted and covered outlet in one end and a ten foot cord on the other so they can be daisy chained together. These lamps are portable and can be laid flat, stood on end, or hung overhead using a canvas strap that is included with the fixture. The T8 LED tubes have a rated service life of 50,000 hours and their solid state design adds to the fixtures’ durability and ruggedness. This LED work light can be mounted flat on the ground or at an angle. Click photo to enlarge. This LED flood light is designed for portability and durability. The LED bulbs in this unit are rated at 50,000 life hours and their output is approximately 45% brighter than the same configuration with T8 bulbs when measured with a Extech light meter at 10 feet. This 120 volt LED portable flood light system contains four 10 watt T8 series LED lamps encapsulated within a rugged enclosure. Each 4 foot lamp is protected by a polycarbonate tube with lamp guards at each end. Each tube is braced at each end with an ABS support that is wrapped in rubber. This rugged construction allows this unit to withstand impacts, dropping and even being stepped on without damage. This portable unit can be laid flat, used upright or hung overhead with the attached nylon strap. A 10 foot SJOW cord wraps at the back of the unit and is terminated with a standard straight blade plug. A rubber booted push button on/off switch turns the lights on and off. This portable LED light is designed to be used in series. A booted, covered outlet on one end of the light enables the operator to daisy chain the lights together, by plugging one into the next. The outlet can also be used for other power tools. This feed through power feature is helpful in areas with limited access to power outlets. Each light ships with a 10 foot cord and is available in color temperatures of 4300K or 6000K with 76 CRI. Standard replacement bulbs for this particular LED work light are LEDT-15W. Specifications / Additional Information WAL-PFL-4LED-24-120-10 WAL-PFL-4LED-24-120-10 Features LEDs: 4- T8 LED Tubes polycarbonate Lamp Protectors Watts: 40 Feed Through Power Connection Voltage: 120 VAC LED Tube Lamps 50,000 Hr Lifespan Wiring: 10Ft SJOW Cord - Feed Through Outlet High Output Lumens: 3,200 LED Light Color: 4300K or 6000K LED Life Expectancy: 50,000 hours Mounting: Portable Amps: 1 @120VAC Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] Scroll Down to Purchase-