Larson Electronics Explosion Proof LED Drop Light / Trouble Light - 10 Watt LED - 15 Meter SOOW Cord - 24V AC/DC EHL-LED-7W-24V-15M

Made in the USA

The Larson Electronics EHL-LED-7W-24V-15M Explosion Proof LED Drop Light / Trouble Light is UL Listed Class I Divisions 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. The EHL-LED-7W-24V-15M operates on 24 V AC/DC.

This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes complete with 15 meters of explosion proof cord. The EHL-LED-7W-24V-15M LED drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very lightweight unit. These LED drop lights improve on the desirable qualities of similar incandescent models with higher foot candle light output, cooler operation and better light quality, and are ideal for use in wet areas and close work. The cool operation, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work and inspection activities. This hazardous location hand lamp is Class I Divisions 1 and 2 and Class II Divisions 1 and 2 hazardous location environment approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired.

100 Watt Incandescent Bulb		With the EHL-LED-7W-24V-15M
Click Photos to Enlarge		Click Photos to Enlarge

Lamp: The 10-watt LED lamp used in this unit produces nearly 3 times the illumination of incandescent lamps as measured in foot candles, at less than 1/10th of the electricity usage and without the associated heat. This LED drop light runs at operating temperatures of 55¡ F, greatly reducing the chances of accidents or burns commonly associated with incandescent drop lights. This lamp has no ballast, which reduces lamp weight, a steel globe guard, and a stainless steel hook for easy overhead mounting. The solid state LED bulb has no filament, making it resistant to damage from impacts and dropping. This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when theÊballast becomes entangled in the cord.

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.

Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on 24 V AC/DC current without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.

Click Photos to Enlarge
5-15 Straight Blade Plug 15 Amp / 125V Rated	L5-15 Twist Lock Plug 15 Amp / 125V Rated	L6-15 Twist Lock Plug 15 Amp / 250V Rated
UK BS1363 Straight Blade Plug 13 Amp / 250V Rated / Internal Fuse	Intl Schuko 2-Pin Plug 16 Amp / 250V Rated / Grounded	Flying Leads / Pigtail Wires

Wiring and Plug: This cart mounted LED flood lighting system is equipped with 15 meters of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.

Please note: The cord cap on this unit is not class rated and must be plugged in outside of the classified hazardous location. Larson Electronics can equip this light with an explosion proof cord cap for complete class rated protection at an additional fee. Cord cap options include explosion proof straight blade plugs and pin/sleeve style cord caps.

The light produced by this unit has a 5600K color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing that remains cool to theÊtouch and eliminates the accidental burns often encountered with incandescent drop lights.