Larson Electronics Explosion Proof Fluorescent Light w/ Emergency Battery Backup - 4' 8 Biaxial Lamp - Paint Booth

Made in the USAThe Larson Electronics EPL-EMG-48-4L-BX Explosion Proof, Paint Booth Approved, Fluorescent Light Fixture with Emergency Battery Backup is NRTL Listed for United States and Canada Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the potential to exist.***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***The EPL-EMG-48-4L-BX is our 4 foot long, 4 lamp style, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is equipped with an added battery backup providing 90 minutes of emergency runtime. This T6 temperature rated fixture comes standard with eight Bi-Axial 40 watt compact fluorescent bulbs which produce a combined 160 watts and 28,000 lumens of illumination. This fixture is multi-voltage capable and provides operators in hazardous locations with a reliable and durable lighting solution that provides explosion proof protection along with the security of emergency battery backup.This fluorescent light works, mounts and is wired like our EPL-48-4L-BX explosion proof fluorescent light fixtures. The main difference is that we attach an extra Bodine ballast box to the unit that adds the emergency light functionality to the fixture. This explosion proof emergency light will run the standard 90 minutes after power is lost. The light recharges the battery once standard electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 3500 lumens for 90 minutes. For an additional charge, a second ballast can be added to run a second lamp for 7000 total lumens output for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.Mounting:Standard end mounting via Unistrut. The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof LED light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.Suspension Mounting:Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The threaded mounting bracket provides support for the opposite end of the fixture. Suggested Applications:Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.Made in USA QualityLamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.F40BX/840 – 40 watt, 3500 lumens per bulb, 22,500 hours life, 4000 Kelvin color (Suffix –BX)Click here to see the LED version of this lightSpecifications / Additional Information EPL-EMG-48-4L-BX Explosion Proof Biaxial Failsafe Emergncy Light Ratings/ApprovalsNRTL Listed for United States & Canada Class I Division 1, Groups C and D T6Lamp Type: Biaxial Compact Fluorescent Class I Division 2, Group A,B,C,DDimensions: 52"-L x 22.50"-W x 8.5"-H Class II, Division 1 & 2, Groups E,F,GWeight: 130 Lbs NRTL Certified to UL 595 Marine Type (Saltwater)Voltage: Universal 120-277VAC 50/60 Hz NRTL Certified to UL 844, UL 924Total Wattsage 56 watts NRTL Certified to UL 1598 Marine TypeTotal Lumens: 28,000 Certified Canadian StandardsLumens per Lamp: 3,500 Listed for Paint Spray BoothsLuminous Efficacy: 87.5 Lm/W California Title 24 CompliantLamp Life Expectancy: 22,500 Hours IP67 Rated - WaterproofColor Temp: 4000K T6 Temperature RatingColor Rendering Index: 82 NEMA 4XBeam Angle: 150¡ Approved for Confined SparesAmbient Operating Temp Range:0¡ C to +50¡C Approved for Confined SparesOperating Temp Range: T6 Rated Factory Sealed FixtureMinimum Operating Temp: -30¡ C Failsafe LightingMaximum Case Temp: 90¡ C Emergency Battery BackupBattery AC Input Voltage: 120/277V AC 60Hz Switch Leg for Powering Light On/OffBattery AC Input Current: 90 mA 90+ Minute RuntimeBattery AC Input Current: 90 mA Made in the USABattery Output Current: 120V @ 165mA - 277V @ 72mA Illumination Time: 90+ Minutes Battery Type: High Temp, Maintenance Free, Nickel Cadmium Battery Lifespan: 7 to 10 Years Battery Charge Current: 250 mA Battery Recharge Time: 24 Hours Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Lens Material: Hardened Borosilicate Glass Tubes Gasket Material: Buna Rubber O-Rings Mounting: Unistrut Surface Mount - Pendant Mount Optional Special Orders- RequirementsWiring Hub: 1/2" NPT Contact us for special requirementsToll Free: 888-325-4448Intl: 1-903-270-1187View dimensional drawings for this explosion proof light E-mail: [email protected]