Larson Electronics Explosion Proof Exit Sign - C1D1 - IP65 - 120V/277VAC - Emergency Battery Back-Up - 1" Extended End Mount Bracket

Made in the USAThe EPL-EMG-EXT-3W-EMB-1IN Explosion Proof LED Exit Sign with back up emergency ballast from Larson Electronics is rated Class 1 Division 1 Class II Division I & II and is an ideal emergency exit marking solution for hazardous locations where failsafe reliability is a must. The exit sign is mounted to walls or flat surfaces via an aluminum end mount bracket which extends the fixture 1 inch from the wall.The EPL-EMG-EXT-3W-EMB-1IN is an effective option for operators who wish to ensure their hazardous work spaces employ the most up to date and reliable means of marking emergency exit-ways available. Under normal conditions this emergency exit lamp uses normal external power to illuminate its 3 watt LEDs. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for three hours or until power is restored. This fixture has three mounting options and is multi-voltage capable. Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeThis emergency exit marking fixture is explosion proof and carries an integral battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the lamp for three hours, longer than the requirements specified in the NEC. The EPL-EMG-EXT-3W-EMB-1IN sign panel is edge illuminated by LEDs and as a result draws only 3 watts of power and has an extreme LED luminary lifespan rated at 25 years. This fixture is approved for outdoor use and is resistant to saltwater making it suitable for use in marine environments.The unit is multi-voltage capable and can operate with 120V-277V/ 60HZ. This fixture can be pendant mounted, end mounted or wall mounted and is constructed of copper-free aluminum. The mounting bracket extends the fixture 1 inch away from the wall and has a total extension length of 16 inches from wall surface once installed. The LEDs in this unit produce very effective panel illumination that will be visible through smoke or obstructions making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.Made in the USA Quality Superior LED Benefits1. Uniform LED illumination2. Battery Replacement Notification Built In3. Universal 120V through 277VAC Selectable4. 3 Hour Battery Backup Runtime5. Copper-free aluminum housing6. 1/2” NPT conduit hubs7. Maintenance free8. 25 Year LED Rated Lifespan9. Fully Automatic Operation10.Clear Acrylic Light Guide11. High Intensity LEDs12. Low Power Consumption (3 watts)13. Fully Electronic Circuit Control1. Extreme long life.2. High efficiency and low amp draw.3. High durability and reliability.4. Small size and light weight.5. 100% recyclable.6. No toxins-lead, mercury.7. High light output.8. Consistent color over time.9. High Versatility.10. No fragile glass used in construction. 12. Vibration/impact resistant. Specifications / Additional Information EPL-EMG-EXT-3W-EMB-1IN Explosion Proof Exit Sign Ratings/ApprovalsNRTL Listed for United States & Canada Class I, Division 1, Groups C & DLamp Type: LED Class I, Division 2, Groups A, B, C, DDimensions: 26.8"L x 3.69"W x 16"H Class II, Division 1, Groups E, F, GVoltage: 120/277VAC Class III, Division 1Watts: 3 Class I, Zone 1, Groups IIA, IIBLighting Configuration: Edge Illuminated Sign Panel Class I Zone 2, Groups IIA, IIB + H2 & IICBattery Backup Runtime: 3 Hours NRTL Certified to UL 1598A, 844, 924, Marine UseBattery Backup: Nickel Cadmium Battery Pack IP65, NFPA 101Materials: Copper Free Aluminum Housing T6 Temperature RatingMounting: End Mount - 1" Extension from Wall - 16" Total Extension Special Orders- RequirementsWiring: 1/2" NPT Wiring Hub Contact us for special requirementsPhone: 1-214-616-6180Toll Free: 888-325-4448Fax: 1-903-498-3364E-mail: [email protected]