Larson Electronics Explosion Proof Exit Sign - Class I, Division I - IP65 - 120V/277VAC - Emergency Battery Back-Up

Made in the USA The EPL-EMG-EXT-3W Explosion Proof LED Exit Sign with back up emergency ballast from Larson Electronics is rated Class 1 Division 1 Class II Division I & II and is an ideal emergency exit marking solution for hazardous locations where failsafe reliability is a must. The exit sign is double sided, and can be seen from both sides. The EPL-EMG-EXT-3W is an effective option for operators who wish to ensure their hazardous workspaces employ the most up to date and reliable means of marking emergency exit-ways available. Under normal conditions this emergency exit lamp uses normal external power to illuminate its 3 watt LEDs. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for three hours or until power is restored. This fixture has three mounting options and is multi-voltage capable. Click here for the non-emergency explosion proof exit sign. Self-Adhesive Directional Arrows Included - Customer Applied Adhere to Front/Back for Dual Faced Signs Exit: Left Exit: Right/Left Exit: Right Self-Adhesive Arrows Included Click Photo to Enlarge This emergency exit marking fixture is explosion proof and carries an integral battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the lamp for three hours, longer than the requirements specified in the NEC. The EPL-EMG-EXT-3W sign panel is edge illuminated by LEDs and as a result draws only 3 watts of power and has an extreme LED luminary lifespan rated at 25 years. This fixture is approved for outdoor use and is resistant to saltwater making it suitable for use in marine environments. Dual Side Single Side The unit is multi-voltage capable and can operate with 120V-277V/ 60HZ. This fixture can be pendant mounted, ceiling mounted or wall mounted and is constructed of copper-free aluminum. The LEDs in this unit produce very effective panel illumination that will be visible through smoke or obstructions making identification and location of exits in emergency situations easier than with typical self illuminated exit markers. Made in the USA Quality Superior LED Benefits 1. Uniform LED illumination2. Battery Replacement Notification Built In3. Universal 120V through 277VAC Selectable4. 3 Hour Battery Backup Runtime5. Copper-free aluminum housing6. 1/2” NPT conduit hubs7. Maintenance free8. 25 Year LED Rated Lifespan9. Fully Automatic Operation10.Clear Acrylic Light Guide11. High Intensity LEDs12. Low Power Consumption (3 watts)13. Fully Electronic Circuit Control 1. Extreme long life.2. High efficiency and low amp draw.3. High durability and reliability.4. Small size and light weight.5. 100% recyclable.6. No toxins-lead, mercury.7. High light output.8. Consistent color over time.9. High Versatility.10. No fragile glass used in construction. 12. Vibration/impact resistant. Specifications / Additional Information EPL-EMG-EXT-3W Explosion Proof Exit Sign Ratings/Approvals Listing: United States & Canada Class I, Division 1, Groups C & D Lamp Type: LED Class I, Division 2, Groups A, B, C, D Dimensions: 14.8"L x 3.69"W x 16"H Class II, Division 1, Groups E, F, G Voltage: 120/277VAC Class III, Division 1 Watts: 3 Class I, Zone 1, Groups IIA, IIB Lighting Configuration: Edge Illuminated Sign Panel Class I Zone 2, Groups IIA, IIB + H2 & IIC Battery Backup Runtime: 3 Hours UL 1598A, 844, 924, Marine Use Battery Backup: Nickel Cadmium Battery Pack IP65, NFPA 101 Materials: Copper Free Aluminum Housing T6 Temperature Rating Mounting: Ceiling Mount, Pendant Mount, Wall Mount Special Orders- Requirements Wiring: 1/2" NPT Wiring Hub Contact us for special requirements Phone: 1-214-616-6180 Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected]