Larson Electronics Explosion Proof Enclosure - C1D1 - 12"x12"x8" - Internal Dims - Aluminum Back Plate - Surface Mount

The Larson Electronics EPL-AEB-12.12.8-BP Explosion Proof Enclosure provides operators with a Class I and II, Divisions 1 and 2 copper-free aluminum enclosure designed to hold electrical equipment up to 12" by 12" by 8" in size. Equipped with an internal aluminum back plate, this NEMA 4X rated explosion proof device is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSION PROOF ENCLOSURES* The EPL-AEB-12.12.8-BP explosion proof enclosure is made of copper-free aluminum and includes a watertight gasket for a NEMA 4X protection rating. The internal cavity of this flameproof enclosure measures 12" in length by 12" in width by 8" in height. This unit caters to a maximum of 16 operators on the lid (4 rows of 4 = 16) and a maximum conduit size of 5". There are no penetrations on the lid and sides of the enclosure. Explosion proof enclosures with penetrations are offered with custom requests and other variants of this unit. Operators may access an aluminum back plate inside the enclosure for mounting customer-provided equipment. Equipped with a bolted cover, the grey explosion proof enclosure is compatible with surface-mount applications. This explosion proof device is designed for Class I, Divisions 1 & 2 (Groups B,C,D); Class I, Zones 1 & 2 (Groups IIB+H2,IIA); Class II, Divisions 1 & 2 (Groups E,F,G) and Class III rated combustible sites. The NEMA 4X rating makes the unit suitable for both indoor and outdoor applications, as well as ensures protection from water, dust, moisture, dirt and external ice formation. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting Systems, Oil and Gas, Marine Sites, Textile, Food Processing, Chemical Storage, Wet areas or Locations Where Combustible Dust is Present. At Larson Electronics, we can build enclosures to your specifications. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information EPL-AEB-12.12.8-BP Explosion Proof Enclosure Ratings External Dimensions: 16.38" x 10.69" x 16.38" Class I, Divisions 1&2 Groups B,C,D Internal Dimensions: 12”-L x 12”-W x 8”-H Class I, Zones 1&2 Groups IIB+H2,IIA Pan Dimensions: 10.5" x 10.5" Class II, Divisions 1&2 Groups E,F,G Available Dimensions for Devices: 11.37" x 11.37" x 8" Class III Weight: 83 lbs NEMA 3, 4, 4X Maximum Conduit Size: 5" CENELEC/ATEX/IEC Ex Maximum Operators on Lid: 4 Rows of 4 = 16 Ex d IIB + H2 T5 or T6 Mounting Leg Height: 0.25" Ex tD A21 IP66 Mounting Dimensions (Horizontal) Height: 14.94" Tamb = + 60¡C Mounting Dimensions (Horizontal) Width: 6.94" No Penetrations on Lid and Sides Mounting Dimensions (Vertical) Height: 6.94" Mounting Dimensions (Vertical) Width: 14.94" Cover Type: Bolted Materials: Copper-free Aluminum Mounting: Surface Mount Backplate: Internal, Aluminum Special Orders- Requirements Hinges: N/A Contact us for special requirements Hubs: N/A Phone: 1-214-616-6180 Color: Grey Toll Free: 888-325-4448 Shipping Dimensions: 48"-L x 48"-W x 24.38"-H Fax: 1-903-498-3364 Shipping Weight: 138 lbs E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*