Larson Electronics Compact Visible / Infrared Combination LED Light - Stud Mount - 9-48V

Buy American Compliant The LED10W-2S-VIR LED Light is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This ultra compact LED light produces a combination visible and infrared light output with low voltage and amp draw, 50,000 hour service life and 9 to 48 volt compatibility, providing operators with a versatile and powerful LED lighting solution. The LED10W-2S-VIR LED light emitter from Larson Electronics produces a dual visible/infrared light output while drawing only 13 watts @ 1.08 amps from a 12 volt electrical system. One Seoul Z-Power¨ 10 watt LED producing 900 lumens is mated with one infrared emitter producing an IR beam in the 750NM, 850NM or 940NM wavelength are combined with high purity optics to produce a 10 degree spread spot beam. We also offer floodlight versions with a 35 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. This particular unit is ultra compact at only 4 inches wide by 3.2 inches tall, by 2.5 inches deep, which makes it ideal for applications where electrical power and mounting space is at a premium. Another unique feature of this LED light is that the side brackets enable the operator to connect multiple units together. Thus, operators can combine any number of units to achieve the power and dimensions required for most any application. The LED10W series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. A small profile, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, offroading and commercial structure illumination. Power: Two separate power connections are provided, including one that powers the infrared LED and one that powers the visible LED. Thus, the visible LED can be connected to a MRAP or MATV blackout system, enabling the visible light to be turned off when the operator goes into covert mode. One 10 watt is dedicated to visible lighting, while the other 3 watt LED is dedicated to infrared lighting. The infrared portion of this LED light can be configured with 750Nm, 850nm or 940nm wavelength IR LEDs. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Cree XLamp¨ Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10W series LED lights can operate on current ranging from 9 to 48VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical. Durability: The LED10W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand frigid temperatures, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Seoul Z-Power¨ LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Mounting: Suspended on top of adjustable u-brackets, this LED light can be adjusted and tightened into any position to suit your application. A single stud protrudes from the bottom of each u-bracket mount, enabling the operator to install the light using a simple through hole mount. In other words, the light can be installed anywhere a 1/4 inch hole can be drilled. Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. LEDP10W-2S-VIR 35¡ Flood Beam (Opt) LEDP10W-2S-VIR 10¡ Wide Spot Beam (Stnd) Specifications / Additional Information LED10W-2S-VIR LED Light LED10W-2S Features Lamp Type: Visible/Infrared Combination LED Seoul Z-Power¨ LED Dimensions: 4 "W 3.2"-H 2.5"-Depth Low Amp Draw Watts: 13 Small Size Led Drive %: 80% 50,000 Hour Service Life Voltage: 9-48 VDC Shock Vibration Resistant Lighting Configuration: 10¡ Spot or 35¡ Flood Op Temp -45C to 80C Mounting: Adjustable U-Bracket Multi-Unit Connectable Wiring: Deutsch IPD / LADD DT04-2P connector Amps: 1.08 Amps (on 12 volts) Lumens: 900 (Visible portion) Special Orders- Requirements LED Light Color: 6000K + IR (750NM / 850NM / 940NM) Contact us for special requirements LED Life Expectancy: 50,000 hours Toll Free: 1-800-369-6671 Optics Efficiency: 90% Materials: Aluminum Housing, Polycarbonate Lens E-mail:[email protected] Weight: 26 Ounces Housing Colors: Black or White CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-