Larson Electronics Compact 7 Watt LED Fixture for Industrial Lighting - Aluminum Housing - 12-28VDC - IP66 Waterproof

Buy American Compliant The Larson Electronics GAU-7W-LED is a low voltage industrial lighting solution approved for outdoor environments and IP66 waterproof for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 VDC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications. The GAU-7W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where corrosion resistance and waterproof light fixtures are required. This low voltage industrial LED light can be operated with either 12 or 24 volt DC current and includes 5 feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability, clear anodized for corrosion resistance, and is rated IP66 for ingress protection against dust and direct exposure to high pressure water spray. The GAU-7W-LED is also available in a 30 degree spotlight beam configuration for distance and a 100 degree configuration for wide area illumination. The light output is offered in cool white, neutral white, and warm white color temperatures for maximum illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps. Durability: The GAU-7W-LED industrial grade LED light is constructed of machined aluminum for high strength and durability with a clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts, dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight configuration for long beam length or 100 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. The GAU-7W-LED has multiple color temperature options and is offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80. Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is predrilled with two _ inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support. Wiring/Power: These industrial LED lights are equipped with 5 feet of cord containing a standard two wire (White+ Black-) connecting configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC. Versatility: The GAU-7W-LED is ETL listed, certified to CSA 22.2 No. 250.0, and conforms to UL 1598. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty or wet conditions are commonly encountered. Specifications / Additional Information GAU-7W-LED Industrial LED Light ETL Listed Lamp Type: LED CSA 22.2 No. 250.0 Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth UL 1598 Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W IP66 Ingress Protection Weight: 2.3 lb | 1.04 k g T3 Temperature Rating Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC LM-80 > 60,500 hrs (based on Cree long term tests) Voltage: 12-28 VDC Lumens: Spot: 587 - Flood: 459 Lamp Life Expectancy: 100,000 Hours CRI: CW: 75, NW: 75, WW: 80 Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC Light Color: CW: 6500K, NW: 4300K, WW: 3500K Beam Type: 30¡ Spot or 100¡ Flood Mounting: 1/4” - 20 Screws /Aluminum Yoke Materials: Machined aluminum housing - acrylic lens Special Orders- Requirements Housing Finish: Clear anodized finish Contact us for special requirements Temp Range: -40¡C to +85¡C Toll Free: 1-800-369-6671 Typical Case Temperature: ~20¡C above ambient temperature Wiring: 5Ft Lead | White: + Black: - E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-