Larson Electronics Compact 7 Watt Blue LED Fixture for Hazardous Area Location Lighting - Aluminum - 12-24VDC - C1D2

Buy American Compliant The Larson Electronics HAL-7W-LED-BLUE is a low voltage hazardous area lighting solution approved for Class 1 Division 2 Environments and 1598 compliant for use in wet locations. This powerful LED light produces 587 lumens of blue light output, operates from 12 or 24 VDC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications. The HAL-7W-LED-BLUE is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 5 feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability and is rated IP66 for ingress protection against direct exposure to high pressure water spray. The HAL-7W-LED-BLUE is available in a 30 degree spotlight beam configuration for distance and a 120 degree configuration for wide area illumination, and a blue color output. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps. Durability: The HAL-7W-LED-BLUE hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from dusts, dirt, oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet condictions are commonly encountered. High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight configuration for long beam length or 120 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is predrilled with two _ inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support. Wiring/Power: These hazardous location LED lights are equipped with 5 feet of cord containing a standard two wire (White+ Black-) connecting configuration. These lights operate from 12 or 24 volt DC current at 7.9 watts 0.66 amps on 12 VDC and 8.4 Watts 0.35 amps on 24 VDC. Versatility: The HAL-7W-LED-BLUE is ETL approved for Class 1 Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating ensuring protection against ingress from dusts, dirt, oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous location classification where wet conditions are commonly encountered. Specifications / Additional Information HAL-7W-LED-BLUE Hazardous Location LED Light ETL Listed Lamp Type: LED Class 1 Division 2 Groups A,B,C,D Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-Depth CSA 22.2 No. 250.0 Lamp Dimensions (w/ Bracket): 4.87"-H x 4.22" W UL 1598 Weight: 2.3 lb | 1.04 k g IP66 Ingress Protection Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC T3 Temperature Rating Voltage: 12-28 VDC LM-80 > 60,500 hrs (based on Cree long term tests) Lumens: Spot: 587 - Flood: 459 Lamp Life Expectancy: 100,000 Hours CRI: CW: 75, NW: 75, WW: 80 Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC Light Color: Blue Beam Type: 30¡ Spot or 120¡ Flood Mounting: 1/4” - 20 Screws /Aluminum Yoke Materials: Machined aluminum housing - acrylic lens Special Orders- Requirements Housing Finish: Clear anodized finish Contact us for special requirements Temp Range: -40¡C to +85¡C Toll Free: 888-325-4448 Typical Case Temperature: ~20¡C above ambient temperature Wiring: 5Ft Lead | White: + Black: - E-mail: [email protected] Scroll Down to Purchase-