Larson Electronics 960W High Intensity LED Light Plant - 3-Stage 14' to 30' Mast - Day/Night Sensor

Larson Electronics

(No reviews yet) Write a Review
SKU:
LM-SMXB-30-14-2X500LTL-LED-DNS-2KLBS
Weight:
0.00 LBS
Call for price
Made in the USA The Larson Electronics LM-SMXB-30-14-2X500LTL-LED-DNS-2KLBS three-stage light plant provides a safe and effective way for operators to quickly deploy 960 watts of intense lighting to elevations up to thirty feet. The two, 480-watt LED lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. The light tower features a rotating boom that allows for 360¡ of rotation, a removable mast head for storing mounted equipment when not in use, 4-corner skid pockets for easy transportation, day/night sensor and 100 feet of 16/3 SOOW cable. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The LM-SMXB-30-14-2X500LTL-LED-DNS-2KLBS three-stage telescoping steel light mast is designed to quickly and safely deploy 960 watts of intense LED lighting in locations where elevated illumination is needed for maximum area coverage. This light boom can be extended to 30` for maximum area coverage and collapsed/folded over to 14` for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 11.27` in length and 4" by 4" by 1/8" thick, middle section 10.73` in length and 3" by 3" by 1/8" thick, and an upper section 10.63` and 2" by 2" by 1/8" thick. Each section has a 1` overlap minimum. The mast is elevated using an included 2,500 lbs manual winch. LED Light Heads Day/Night Sensor Back Angle Winch Mast Pin Rotation Bolt LED Lights: Included with this light tower are two of our wet area suitable GAU-LTL-500W-LED high output LED fixtures producing a combined total of approximately 129,600 lumens at 960 watts. The LED lamps on this unit operates on 120-277V AC. A day/night sensor is available for automatic detection of lighting needs in the area. Each light head contains forty-eight CREE¨ high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24¡ wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10¡ spot, 38¡ narrow flood, 60¡ flood, and 90¡ wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. Alternative customer configurations are available upon request, including alternating beam configuration fixtures. Please contact us for special requirements. Mast Safety Pin Mast Lowered & Extended LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. Durability: As well as unparalleled heat control, the GAU-LTL-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE¨ LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. Fixture Adjustment: Each LED lamp is securely fastened to the light boom`s mast head, and each lamp includes an adjustable trunnion U-bracket to help maintain lamp stability within its housing. This trunnion mount bracket allows the light to be vertically adjusted 180¡, allowing operators to position the light straight upwards or straight downwards. Each light head can be adjusted independently, providing maximum coverage of the work environment. The trunnion mount is attached to the mast head via a single thru-bolt, allowing for horizontal positioning of each light fixture. This allows operators to cover areas to the side and behind the skid mast tower instead of only in front of the unit. Technology: The LED light heads on this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. Unlike some LED manufacturers where an LED failure in the circuit will cause the entire circuit to cease operator, each light emitting diode in these light fixtures will operate independently and are not affected by the operate of neighboring diodes. In the event of an individual LED failure, the mating LEDs will continue to operate. Optional Finish Glossy Blue Powder Coat Galvanized Tower Base: The tower and assembly is powder coated with glossy blue finish for corrosion resistance and aesthetics. This 3-stage mast features a cube mast-style weighted base and is bolted onto a 1" thick steel base plate. Four skid pockets allow this unit to be picked up from all four sides. 4-corner eyelets for crane transport. A manual 2,500-lb winch is available for deployment. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. This light plant system can withstand winds up to 125+ mph when lowered to 14`, and up to 55 mph when fully extended. When elevated to its full upright position,the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. For example, the LM-25 is another model that reaches to a length of 25 feet, with a 15 foot lower section and a 10 foot upper section and a 4 foot wide upper mounting bracket. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: The LED light plant comes with one plug on the input lead and 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E , LEDLB-160X2E or LEDLB-80x2E . At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LM-SMXB-30-14-2X500LTL-LED-DNS-2KLBS 960W High Intensity LED Light Plant - 3-Stage 14` to 30` Mast - Day/Night Sensor Quick Summary Lamp Type: LED Mast Summary Lamps: (2) 480 Watt LED Fixtures 14` to 30` Total Watts: 960 Steel Construction Total Lumens: 129,600 Powder Coated Finish Mast Length: 14` to 30` Removable Mast Head Total Extended Height (w/ Light Heads): 30` 125 mph Wind Resistance Total Collapsed Height (w/ Light Heads): 14` UL 508A Capacity: 300 lbs Fold-Over Storage Mechanism Materials: Steel Photo Cell Switch Finish: Powder Coated - Gloss Blue Operation: 2,500 lbs Manual Winch Mast Cable: 100` 16/3 SOOW Cord w/ Cord Cap Options (Choose Below) Base Type: Weighted Cube Mast-Style w/ 1" Thick Steel Base Plate Mounting: 48" x 60" Base Transport Dimes (w/ Light Heads): 48"-L x 48"-W x 133"-H LED Lamp Head Summary Mast Head: 96" x 2" x 2" - 1/4" Thick IP67 Rated Waterproof Mobility: 4-corner skid pockets, 4-corner pickeyes PMMA High Transmittance Optics 80,000+ Lamp Life Multiple LED Banks for Heat Dispersion Lamp Specs Day/Night Sensor Lamp Type: LED Ambient Op Temp -40C to +80C Voltage: 120-277V AC Lamps Adjustable Vertically/Horizontally Lighting Configuration: 10¡ Spot, 24¡ Wide Spot, 38¡ Narrow Flood, 60¡ Flood, or 90¡ Wide Flood Optics Efficiency: 98% - PMMA High Transmittance Optics LED Drive: 90% Lamp Adjustment: Vertical and Horizontal Positioning Luminous Efficiency: 125 lm/w Special Orders- Requirements Color Temp: Cool White - 5500-6500K Contact us for special requirements Lamp Life: 80,000+ Hours Phone: 1-214-616-6180 Materials: Die Cast Aluminum Housing, PMMA Optics Toll Free: 1-800-369-6671 Shipping: Common Freight Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected]

Reviews