Larson Electronics 960W DIN Rail Mount Power Supply - 220VAC Input - 48V Output - 20 Amps

The MMT-IDR-220V-20A-48V-MOD1 from Larson Electronics is a Single Output Industrial Power Supply that is designed to convert input voltages ranging between 100-260VAC and 120-370VDC to 48V DC at 20 amps. This device may be installed on DIN Rail TS-35/7.5 or 15 and supports the following protection mechanisms: overload, short circuit, over voltage and over temperature. The 960-watt unit is suitable for use in marine-related installations, electro-mechanical applications, semi-conductor fabrication equipment and factory automation. Features: This single output power supply supports single and two phase wide input range at 100-260VAC. It may be used to safely convert such input voltage range to 48VDC for compatibility with equipment that requires 48VDC current. The device may be applied to operate equipment up to 960 watts. The converter features a rated input voltage of 115-230V with a voltage tolerance of +/- one percent. It also supports a working temperature range of -35¡C - +70¡C and a working humidity range of 20-95 percent. The industrial power supply comes with overload, over circuit, over temperature and short circuit protection. In the event of over temperature (90¡C ±5¡C), the unit will shut down the operating voltage and recover automatically after temperature normalization. Should over voltage occur, the unit will also shut down the operating voltage and automatically recover after one minute (when the fault condition is removed). This device features an input efficiency rate of 90 percent and low power dissipation. It supports cooling by free air convection and a built-in DC OK relay contact. The converter is UL 508 approved for industrial control equipment. NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75% of the unit`s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you intend to use with this unit and divide this total by 12 volts to find the total amperage draw that will be placed upon the converter. For example, if you are using two of our LEDP10W-120E 120 watt LED lights, 120 watts divided by 12 volts is 10 amps. This would mean the MMT-IDR-220V-20A-48V-MOD1 is well suited as it would run at under 75% capacity to produce the necessary 10 amps. Running these units at 100% of their capacity can create excess heat and lead to shortened converter life. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information<hr> MMT-IDR-220V-20A-48V-MOD1 Single Output Power Supply Quick Summary Device Type: Single Output Power Supply UL 508 Approved Input Voltage Range: 100-260VAC; 120-370VDC DIN Rail Compatible (TS-35/7.5 or 15) Frequency Range: 50-60 Hz Built-in DC OK Relay Contact Output DC Voltage: 48 V DC @ 20 Amps EN61000-6-2 (EN50082-2) Industrial Immunity Level Rated Power: 960 Watts Rated Input Voltage: 115-230V Voltage Tolerance: ± 1.0% Line Regulation: ± 0.05% Isolation: 3000 VAC; 4242 VDC Isolation Resistance: 100 M? Derating: 55¡C - +70¡C Power Factor: PF = 0.9 @ 230 VAC Voltage Trim Range: 47~56 VDC Input Interal Fuse: 20 A / 250 VAC Special Orders- Requirements Protection: Short Circuit, Overload, Over Voltage, Over Temperature Contact us for special requirements Efficiency: 90% Toll Free: 1-800-369-6671 Operating Temp: -30¡C - +70¡C Intl: 1-214-616-6180 Dimensions: 4.33"W x 4.93"H x 5.91"D Fax: 1-903-498-3364 Weight: 5.45 lb E-mail:[email protected] -Scroll Down to Purchase-