Larson Electronics 9' to 40' Telescoping Light Mast - Stationary Eight Stage Light Tower - Manual Crank Winch

The Larson Electronics LM-40-9-8S-FM fixed mount 8-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to forty feet. Equipped with 2,500 lbs hand crank winches for manual deployment, this stationary light tower features a rotating boom that allows for 360¡ of rotation and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping eight stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras and other electrical equipment in locations where such equipment must be elevated to heights up to 40` for effective coverage. The light boom can be extended to 21` for maximum area coverage and collapsed to 9.1` for applications where a smaller footprint is required. The mast is elevated using an included 2,500 lbs manual hand crank winch with 3/16" galvanized steel cable. The tower is constructed of square steel tubing with a lower section 6.18` in length and 10" by 10" by 3/8" thick, second section 6.27` in length and 8" by 8" by 3/8" thick, third section 6.45` in length and 6" by 6" by 3/8" thick, and an upper section 8.45` in length and 4" by 4" by 1/2" thick. Each section has 2` of overlap. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via a 28" by 28", 1/2" thick mounting base-plate which has been drilled to accept six 1-1/4" anchor bolts. Two 3" by 6" by 1/4" thick skid pockets at the base of the mast aid in transportation and installation of the mast. When fully collapsed, the top stage has 24" extending from the second stage, allowing operators to mount larger equipment without having to dismount when collapsed. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 9`, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in any direction and locked back in place by re-tightening the T-handle. The mast itself spins freely with ease, and can typically be rotated with a single hand. This light tower weighs approximately 1,200 lbs, can easily support and lift 1,500 lbs. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5 feet long, 4 feet wide, 5 feet tall and weighs approximately 2,000 lbs. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. For example, the LM-30-3S is another model that reaches to a length of 30 feet, with a 14 foot lower section, 12 foot middle section, and a 8 foot upper section and a 4 foot wide upper mounting bracket. We also offer a choice of either the manual 2,500 lbs hand winches or optional electric winches. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LM-40-9-8S-FM Eight Stage Telescoping Light Tower Quick Summary Length: 9.17` - 40` 9.1` to 40` Light Mast Weight: +-1,200 lbs Steel Construction Capacity: 1500 lbs Power Coated Finish Materials: Steel 125 mph Wind Resistance Finish: Powder Coated Manual Hand Crank Operation Operation: 2,500 lbs Manual Hand Crank Winches UL 508A Voltage: - Cable: 1/4" Aircraft Cable Mounting: 1/2" Thick, 28"x28" Six Bolt Hole Bracket Special Orders- Requirements Anchor Bolts: (6) 1" Anchor Bolts (Not Included) Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: 16.5`-L x 4`-W x 5`-H Toll Free: 888-325-4448 Shipping Weight: +-2000 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected]