Larson Electronics 70 Watt HID Boat Light w/ Shaft - Adjustable Base with Handle - 6300 Lumen - 12/24 VDC

This is our most popular High Intensity Discharge (HID) equipment light mounted on a 12 or 6 inch boat shaft; complete with a red and green Navigational light. The 8 rubber bushings imbedded in the base mounting plate ensure that the light receives nominal vibration from the equipment it is mounted to. Combined with the fact that HID bulbs have no filament to break and the bulb life is rated at 3500 life hours, this durable HID equipment light is ideal for all kinds of heavy equipment. Furthermore, the bushings act as a beam stabilizer, where operators can use a beam that experiences far less "jiggle" than conventionally mounted lights. Finally, the high impact nylon housing is durable, flexible and lightweight. Light fixture weight is often the cause of the light`s demise in high vibration applications. By reducing the weight, but maintaining the strength with nylon, the light itself does not become an impediment to its own longevity. HID boat light systems - 70 watt HID LIGHT Materials: High Impact Nylon Housing Precision metal reflectors Borosilicate hardened glass lens Dust and water resistance (gaskets and seals) Dimensions: Lens - 6.3 inches wide by 5.9 inches tall Light fixture - 9 inches tall with mounting bracket - 8.5 inches deep Weight - 5.7 pounds With shaft - 21 inches tall with mounting bracket (12 inch shaft); 15 inches tall with mounting bracket (6 inch shaft) Bulb/Ballast Specifications: 70 watt HID Xenon D2 type Lamp 70 watt internal HID ballast - instant on, 3 seconds to full visible power Lumen Output - 6300 lumens +/- 400 lumens HID color temperature 6500K (bright white) Voltage / Amperage Specifications On 12 Volts DC - 7.8 amps start load on 12 Volts DC - 5.8 amps average draw after 60 seconds On 24 volts DC - 3.9 amps start load on 24 Volts DC - 2.9 amps average draw after 60 seconds Same unit works on 12 Volts DC and 24 Volts DC - senses voltage and adapts Waterproof / Vibration Specifications: IP rating: IP 67 Vibration tolerance: 12G RMS (dual bushing mounting system contains 8 bushings to minimize beam bounce and damage to light) Mounting: This HID boat light is mounted via a plate located near the bottom of the shaft. The plate should be flush mounted to a flat surface using bolts. 4 bolts are needed. Operating temperature: -40 degrees C to 105 degrees C Beam Options: Spot configuration - approximately 4000 foot beam that is 140 feet wide at its widest point Flood configuration - covers and area 400 feet long and 400 feet wide CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety Click here for dimensional drawings on the HID-66 Series Lights