Larson Electronics 640 Watt High Intensity LED Light Tower - Three Stage Light Mast - Extends up to 25 Feet

Made in the USA The LM-25-3S-4X150W-LED-AC LED Light Tower from Larson Electronics is an 25` three stage extendable light tower equipped with four high output LED light fixtures producing approximately 20,250 lumens each. This tower will illuminate approximately 2.5 acres and features fold-over operation for easy transportation, a rotating boom that allows for 360° of rotation, and a removable mast head for storing mounted equipment when not in use.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*The Larson Electronics LM-25-3S-4X150W-LED-AC telescoping steel light tower mast is designed to allow operators to quickly and safely deploy lighting and other electrical equipment in locations where this equipment must be elevated to heights up to 25` for effective light coverage. This light boom can be extended to 25` for maximum area coverage and collapsed to 14.5` for applications where a footprint smaller than 15` is required. The tower is constructed of square steel tubing with a lower section 8.5` in length and 4" by 4" by 1/8" thick, a middle section 9.5` in length and 3" by 3" by 1/8" thick, and an upper section 10` and 2" by 2" by 1/8" thick. Each section has a 1` overlap. The mast is elevated using an included 1,000 lbs hand winch with 1/4" cable and extended to its full height using a second 1,000 lbs winch.This is a heavy duty unit designed for use in demanding conditions and for overall longevity in difficult construction environments with heavy duty steel construction for maximum durability. We make this lighting solution in the United States. Larson Electronics tower lights are designed for industrial, commercial, emergency response, and military applications where the operators are working in harsh, destructive environments and the operators income or mission success are dependent on dependable, durable lighting. Included with this light tower are four of our wet area suitable GAU-LTL-150W-LED LED fixtures producing a combined total of approximately 81,000 lumens at only 600 watts. Each fixture produces 20,250 lumens of high intensity light while drawing only 150 watts at 1.25 amps from a 120 volt electrical system. Sixteen CREE® high output LEDs producing 1,265 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. These light masts are typically mounted to trailers or other stable surfaces via a 15" by 13" by 1/4" thick mounting base-plate which has been drilled to accept six 9/16" anchor bolts. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for light fixtures and equipment.The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 12`, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely, and can typically be rotated with a single hand. This light tower weighs approximately 450 lbs. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5` long, 4` wide, 5` tall and weighs approximately 1200 lbs. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches.Suggested Applications: Construction sites, event lighting, emergency services, highway projects, industrial plants, mining and excavation and anywhere a mobile light source with large area coverage capability is needed. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information LM-25-3S-4X150W-LED-AC 600 Watt LED Light TowerQuick SummaryExtended Height: 305.73" (with light heads)14.5` to 25` Foot Light Mast Collapsed Height (Upright): 174.73" (with light heads)Steel ConstructionCollapsed Dimensions (Fold-Over): 171.66"L x 44"W x 59.86"HPower Coated Finish Weight: +/- 450 lbs lbs125 mph Wind ResistanceCapacity: 150 lbsMaterials: SteelFinish: Powder Coated - Gloss BlueOperation: 2-1,000lbs Hand Winches, Electric OptionalCable: 3/16" Aircraft CableMounting: 1/4" thick, 13"x15" Base PlateAnchor Bolts: (6) 9/16" Bolts>Shipping: Common FreightShipping Weight: +-500 lbsOptions: Length- Mounting-Fixtures/ Call Us for Special RequirementsSpecial Orders- RequirementsWattage: 640W (4 x 160 Watt)Contact us for special requirements Lumens: 81,000 (20,250 per light head)Phone: 1-214-616-6180Voltage: 120-277V AC 50/60 HzToll Free: 888-325-4448Wiring: 10` 16/3 SOOW w/ Cord Cap From Base of MastFax: 1-903-498-3364Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or PigtailE-mail: [email protected]