Larson Electronics 60 Watt Low Profile Pole Top Mount LED Flood Light - Wide Flood Beam - Angled Reflector

Made in the USA The LEDWP-600E-PT from Larson Electronics is a Pole Top Mount LED Flood Light that offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light produces a wide flood beam without the high heat, fragile construction, or high energy costs of incandescent lighting. The LEDWP-600E-PT LED flood light from Larson Electronics produces a long flood beam of light while drawing only 0.5 amps at 120V AC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED flood is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. Variety Pole Sizes Available 17" Pigtail Wiring The LEDWP-600E-PT consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. An optional glare shield it shipped with this light. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Mounting hardware for the LEDWP-600E-PT consists of an aluminum pole top mount bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. The LEDWP-600E-PT is available for a variety of pipe diameters including 1", 1.5", 2", 2.5", 3" or 22 millimeters. Please make your selection below when ordering. This unit is designed to operate with voltages ranging from 110V AC to 277V AC 50/60 Hz, providing versatile power connection options. The LEDWP-600E-PT provides an efficient and highly durable alternative to standard quartz and halogen flood lights that produces a longer reaching beam while using only a fraction of the power. Warehouse illuminated by the LEDWP-600E-PT light head. LEDWP-600E-PT light head mounted 15` high illuminating a 30` long by 50` wide parking area. With the LEDWP-600E-PT there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600E-PT is ideal for flood lighting, flood down lighting, upwards lighting, monuments, marinas, docks, warehouses, billboards, parking lots, and security systems just to name a few examples. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDWP-600E-PT Pole Top Mount LED Light LEDWP-600E-STCHN Features Lamp Type: LED Waterproof/Vapor Proof Dimensions: W-9" D-3.25" H-6.5" Operates on Standard 110-277 VAC Watts: 60 Impact/Vibration Resistant Construction Lumens: 5400 50,000 Hour LED Life Luminous Efficiency: 90 lm/w ETL Approved for Wet Locations Color Rendering Index: 80 IP68 Waterproof LED Light Color: Cool White - 6000K Stanchion Mount LED Life Expectancy: 50,000 hours Lighting Configuration: Flood Voltage: 110-277 Volts AC 50/60hz Amp Draw: 0.5A @ 120V Wiring: 17" Pigtail Special Orders- Requirements Materials: Aluminum Housing, Polycarbonate Lens Contact us for special requirements Mounting: Adjustable Bracket Toll Free: 888-325-4448 Ambient Temp Range: -25¡C to +60¡ Weight: 8.3 Lbs. E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. -Scroll Down to Purchase-