Larson Electronics 6 Watt LED Light with Magnetic Base - 12 Foot Cord - Handle - 120-277V - Magnetic Flood Light

Buy American Compliant The MUL-LED-WP50-12C LED Handheld Light Emitter is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This ultra compact LED light produces illumination comparable to a 50-75 watt halogen light without the high heat, fragile construction, or high energy costs of incandescent lighting. This portable work light offers 50,000 hour service life and 120-277 volt AC compatibility, providing operators with a versatile and powerful LED lighting solution. The MUL-LED-WP50-12C 6 watt LED light emitter from Larson Electronics produces a light beam that is well spread without any of the irregularities or dark spot associated with typical halogen lighting. The beam from this compact LED fixture will illuminate an area nearly twice the distance as a standard 50W halogen flood light, but is 30% narrower than a standard halogen floodlight. This compact LED light produces far more light than traditional incandescent lamps yet uses far less power. This particular unit is ultra compact at only 3 inches wide by 4.5 inches tall, by 3.8 inches deep, which makes it ideal for applications where electrical power and mounting space is at a premium. The MUL-LED-WP50-12C consists of six, one watt LEDs housed within a waterproof polycarbonate housing for durability. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. Mounted on top of an adjustable u-bracket, this LED light can be adjusted and tightened into any position to suit your application. This particular unit comes standard with a handle that contains a single 100lbs grip magnet, allowing users to quickly and easily install and position this light, then remove it and install it in another location or on another vessel as needed. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on current ranging from 120 to 240V AC or 12-24V DC, depending on the model purchased, without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This magnetically mounted LED flood light is equipped with 12 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. This versatile work light can be used as an overhead light, pedestal light, and just about anywhere a portable and economical yet powerful illumination is needed. Specifications / Additional Information MUL-LED-WP50-12C LED Light Features Lamp Type: LED Ambient Op Temp -40C to +85C Dimensions: 3" x 4.5" x 3.8" Pin-compatible with the HV9910B Watts: 6 100lb Magnetic Base Led Drive %: 90% Pistol Grip Handle Voltage: 120-240V AC or 12-24V DC CE Certified Lighting Configuration: Flood Mounting: 100 Pound Grip Magnetic Mount with Impact Resistant Handle Wiring: 12` 16/3 SOOW w/ Cord Cap Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Amps: 0.05@ 120V - 0.03 @ 240V Lumens: 1162 Special Orders- Requirements LED Light Color: 6000K Contact us for special requirements LED Life Expectancy: 500,000 hours Toll Free: 888-325-4448 Materials: , Polycarbonate Housing and Lens Housing Colors: Green / Black E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-