Larson Electronics 480V-120V Portable Panel - 8 120V 20A GFCI 5-20R 2 120V 30A L5-30R - Individual Breakers - ACP6034

Made in Texas The Larson Electronics WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC portable power distribution converts 480V AC 50/60 Hz input voltage and steps it down to 120V AC output voltage. This weatherproof portable power distribution unit allows operators to plug into 480V generators and welding outlets via an ACP6034 male pin and sleeve cord cap. The WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC portable wheeled transformer from Larson Electronics is built to provide operators with a reliable source of 120V power. This transformer is designed for portability and convenience as well as durability. Featuring an elevated base platform for protection from standing water and weatherproof construction, the WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC is ideal for powering 120V equipment and lighting in construction, entertainment, job-site, marine, and outdoor locations where 480V generators are providing the power. This portable transformer features eight 120V, 20A GFCI 5-20R duplex receptacles and two 120V, 30A, L5-30R receptacles that provide sealed and secure connections for up to 10 devices. The maximum voltage for all 10 receptacles is 1500W. In addition, the receptacles provide 120V for powering high voltage lighting and equipment without the need for running additional extension cords. Each receptacle features a hinged watertight cover protecting the face from rain, water, and moisture when not in use. The WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC power distribution unit features short circuit and overload protection. In the instance of circuit overload, the unit automatically shuts down to protect the unit from damage and operators manually restart the system. The housing on the WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC is constructed from powder coated steel with a NEMA 3R enclosure rating. The angled base and low center of gravity ensure this low voltage transformer does not tip over when in the field. The entire unit is powder coated with glossy blue finish for corrosion resistances and aesthetics. The assembly is mounted atop four swivel polyurethane casters, two standard swivel and two locking swivel, aiding in transportation within the job site. A top located adjustable push handle allows operators to guide this unit through the workspace. The WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC portable transformer system converts primary 480V AC into 120V AC. Primary voltage is brought in via 30` of 10/4 chemical and abrasion resistant SOOW cable that is fitted with an industrial grade male ACP6034 pin/sleeve cord cap. A 13A breaker protects the primary side of the transformer, and a red LED indicator light illuminates when connected to primary sources and energized. Secondary voltage is distributed via the eight 120V, 20A GFCI 5-20R duplex receptacles protected by four 20-amp, 120V breakers and two 120V, 30A, L5-30R receptacles protected by two 30-amp, 120V breakers. A top located cord management system allows operators to roll up line-in cord when not in use and roll up the extra slack in the power cable during use. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information WALSB-480V.120V-8X20A-2X30A.120-6034-OLP-ICB-PL-WC Spider Box Primary Voltage: 480V AC 50/60 Hz UL 1640 Line-In Cable: 30` 10/4 SOOW Cable w/ Cord Cap NEMA 3R Weatherproof Line-In Cord Cap: Industrial Grade ACP6034 Portable Casters Primary Indication: Red LED Pilot Light Top mounted push handle for portability Primary Protection: 13A Circuit breaker Top located cord management Transformer: 5KVA 480 to 120V N3R Overload Protection - GFCI Outlets Secondary Voltage: 120V AC 480V Power Indication Light Secondary Receptacles: (8) 120V 20A GFCI 5-20R Duplex and (2)120V 30A L5-30R Receptacles Special Orders- Requirements Secondary Protection: (2) 30A Breakers, (4) 20A Breakers, GFCI (5-20R) Contact us for special requirements Dimensions: 33.57"L x 21"W x 40.32"H Toll Free: 888-325-4448 Weight: 150 lbs Mounting: Portable / Base Stand w/ Polyurethane Swivel Casters E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*