Larson Electronics 45 KVA Temporary Power Distribution Panel w/ Casters - 600V 3P Primary - (10) 120V & (4) 208Y Outlet

Made in the USA The Larson Electronics MPD-600.3-45K-125MB-10X120.20-4X208Y.50 heavy duty power transformer substation converts 480 AC three phase electrical current to 120/208Y. This unit provides operators the ability to safely tap into and distribute single phase 120VAC or three phase 208Y power from a variety of sources including generators and direct grid power. This model is designed to support both linear (motor) and non-linear loads (lighting, computers, etc.). For that reason, we deliver 120V and 208Y on the secondary and provide a neutral. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MPD-600.3-45K-125MB-10X120.20-4X208Y.50 transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance, cleaning, equipment installations and repairs requiring an alternative to native power sources. This portable power distribution system makes 120VAC available via (10) GFCI protected 20 amp receptacles and 208Y VAC available via (4) Hubbell CS6369 50 amp receptacles. Line-in power to the 45 KVA transformer is protected by a fused 3-phase, 60-amp NEMA 3R main disconnect fused with three 60-amp time-delay fuses. The NEMA 3R transformer steps down the 600V power to 120/208Y and feeds a 125-amp main breaker panel. The 125-amp NEMA 3R secondary panel contains ten 20-amp breakers protecting ten 5-20 receptacles with waterproof covers and four 50-amp breakers protecting four 50-amp CS6369 receptacles with waterproof covers. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets and a top located lifting eyelet allowing for easy lifting with cable or chain hooks. Alternative frame materials for an additional cost include stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Applications:This power distribution system is ideal for indoor or outdoor use and applications including but not limited to; construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. Applications:- Powder coated steel frame with skid pockets and top pick eye- 10 foot #6 Type W line-in cord- 600V, 3-phase, 60-amp N3R disconnect - 45 KVA 600V to 208Y/120 N3R transformer- 125-amp main breaker 208Y/120 panel- Ten 20-amp, 120V breakers protecting ten GFCI 5-20R outlets with watertight covers- Four 50-amp, 3-pole breakers protecting four CS6369 receptacles Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Larson Electronics is a manufacturer and as such can build portable power distribution systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-600.3-45K-125MB-10X120.20-4X208Y.50 Power Distribution System Ratings Line In: 600V VAC Three Phase (10’ #6 Type W) UL 1640 Portable Power-Distribution Equipment Primary Disconnect:600V 3P 60-amp NEMA 3R Indoor or Outdoor Use Transformer: 45 KVA Nema 3R 600V to 208Y/120 Made in the USA Line-Out Voltage: 208Y/120 3-phase Secondary Panel: 125-amp MB 208Y/120 120 VAC Breakers: (10) 120V 20A Breakers 120 VAC Outlets: (10) 5-20 amp GFCI outlets w/ covers 208Y Breakers: (4) 208Y 50A Breakers 208 Outlets: (4) 50A CS6369 outlets w/ covers Portability: Forklift pockets and top lifting eye Form Factor: Cube style steel frame, powder coated Dimensions: 34”-L X 44”-W X 58”-H (68"-H w/ casters) Weight: 650lbs Special Orders- Requirements Features: Contact us for special requirements Max Primary OCP: 60A @ 600V 3P Toll Free: 888-325-4448 Max Secondary OCP: 125A @ 208Y 3P E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase