Larson Electronics 4000W 20' 2-Stage Light Mast on 14 Foot Single Axle Trailer - (4) 1000 Watt Metal Halides

Made in the USA The Larson Electronics LM-20-TLR14-NOG-4X1000W-MH 4000 watt trailer mounted fold over 2-stage light mast provides a safe and effective way for operators to quickly deploy the equipped metal halide light fixtures to elevations up to twenty feet. The four 1,000 watt metal halide lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. This light tower folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storing mounted equipment when not in use. The entire assembly is mounted onto a 14` single axle trailer, allowing operators to transport this fold over boom from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping three stage steel light mast from Larson Electronics’ is designed to quickly and safely deploy 4,000 watts of metal halide lighting in locations where elevated illumination to heights up to 20` is needed for maximum area coverage. This light boom can be extended to 20 feet for maximum area coverage and collapsed to 12 feet for applications where a footprint smaller is required. The tower is constructed of square steel tubing with a lower section 12 feet in length and 4 inches in diameter and an upper section 10 feet in length and 3.5 inches in diameter with 2 foot of overlap. The mast is elevated using an included 1,000 lbs hand winch with 3/16 inch cable and extended to its full height using a second 1,000 lbs winch. 44" Mast Head for mounting lights and equipment 13" by 15" by 1/4" thick mounting base Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the four metal halide fixtures. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 14` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 5,4000 lbs axle and leaf springs with 15" trailer tires. The trailer can support and haul an additional 3,500 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 4-pin flat trailer plug allow for easy hookup and towing. Manual 1,000 lb hand crank winch for elevating and folding over the light mast on the LM-20-TLR14-NOG-4X1000W-MH. Mast support bracket for securing the mast boom in the fold-over position during transportation. Click Image to Enlarge Click Image to Enlarge The LM-20-TLR14-NOG-4X1000W-MH fitted with four HID-22-SL-REM 1000 Watt Metal Halide Light Fixtures. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge This light tower assembly weighs approximately 375 lbs, can easily support and lift 150 lbs fixtures. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. For example, the LM-40-4S is another model that reaches to a length of 40`, with base section 11.25` in length, lower section 11.25` in length, an upper section 11.25` in length, and a top section 11.75` in length. Larson Electronics can custom build these towers to meet your overall and collapsed height requirements. We also offer a choice of either the manual or electric winches, finishing, and equipped light heads. Winch options include 1,000 lbs hand winches (included standard) or optional electric winches for standard light towers, and heavy duty winches and hoists for high payload units. Powder coating color can be customized (the standard mast is gloss blue). Mast location on the trailer bed can be tongue mounted, front of the trailer bed, or center of the trailer bed. These towers can be fitted with Larson Electronics line of high output light heads, or customize the mast head to meet the mounting requirements for your equipment. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W HID-22-SL-REM or 1500W HID-22-15M-SL-REM Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LED10WSA-320, LEDP5W-30, LEDP5W-60, and GAU-HB-160LED. Specifications / Additional Information LM-20-TLR14-NOG-4X1000W-MH Trailer Mounted 3-Stage Light Tower Quick Summary Light Mast Specs 12 to 20 Foot Light Mast Tower Length: 12 feet - 20 feet Steel Construction Mast Head Length: 44" Power Coated Finish Capacity: 150 lbs Removable Mast Head Materials: Steel Manual or Optional Electric Operation Finish: Powder Coated - Gloss Blue (4) 1000 Watt Metal Halides Operation: (2) 1,000lbs Hand Winches, Electric Optional Cable: 3/16" Galvanized Aircraft Cable Lamp Specs Lamp Type: Metal Halide Lamps: (4) 1000 Watt Metal Halide Sport Lamps Total Watts: 4,000 Total Lumens: 440,000 Voltage: 208V, 220V, 240V, 277V Trailer Specs Materials: Steel Trailer Dimensions: 14-L` x 6`-W trailer bed Hitch: 2" Ball Coupler Wiring: 4-Pin Flat Axle: 5,400lb Suspension: 5,400 Lb 4-Leaf Double Eye Springs Wheels: (2) 15" 5x4.5 Steel Rims Tires: ST205/75/D15 H188 Special Orders- Requirements Weight: +-1200 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: ~16.5`-L x 4`-W x 5`-H Toll Free: 888-325-4448 Shipping Weight: +-1700 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected] The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit.