Larson Electronics 40 Foot Telescoping Light Mast - 13-40' Fold Over Four Stage Light Tower - 360¡ Rotating Boom

Made in the USA The Larson Electronics LM-40-4S fold over 4-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to forty feet. This light tower folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping four stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 40 feet for effective coverage. This light boom can be extended to 40 feet for maximum area coverage and collapsed to 13 feet for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a base section 11.25` in length and 5" x 5" by 3/16" thick, lower section 11.25` in length and 4" x 4" by 1/8" thick, an upper section 11.25` in length and 3" x 3" by 1/8" thick, and a top section 11.75` in length and 2" x 2" by 1/8" thick. Each section has a 15-18" overlap. The mast is elevated using an included 2,500 lbs hand winch with 3/16 inch cable and extended to its full height using a second 2,500 lbs winch. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics, or galvanized for superior corrosion resistance. These light masts are typically mounted to trailers or other stable surfaces via a 15" by 13" by 1/4" thick mounting base-plate which has been drilled to accept six 1/2" anchor bolts. A 44" wide and 2" by 2" by 1/8" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for mounted light fixtures and equipment. The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 14 feet, the mast can withstand winds up to 125 mph. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with ease in either direction. The mast can be positioned in one of four different directions, and locked back in place by re-tightening the T-handle. The mast itself spins freely, and can typically be rotated with a single hand. This light tower weighs approximately 1,100 lbs and can easily support and lift 150 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 16.5 feet long, 4 feet wide, 5 feet tall and weighs approximately 1500 lbs. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 2,500 lbs hand winches included standard or optional electric winches. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E. Specifications / Additional Information LM-40-4S 40ft Four Stage Telescoping Light Tower Quick Summary Length: 13 feet - 40 feet 13 to 40 Foot Light Mast Weight: +-1,100 lbs Steel Construction Capacity: 150 lbs Power Coated Finish Materials: Steel Removable Mast Head Finish: Powder Coated (Gloss Blue) or Galvanized 125 mph Wind Resistance Operation: (2) 2,500 lbs Hand Winches, Electric Optional Manual or Optional Electric Operation Cable: 3/16 Aircraft Cable Mounting: 1/4" thick, 13"x15" Six Bolt Hole Bracket Special Orders- Requirements Shipping: Common Freight Contact us for special requirements Shipping Dimensions: 16.5`-L x 4`-W x 5`-H Phone: 1-214-616-6180 Shipping Weight: +-1500 lbs Toll Free: 888-325-4448 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements Fax: 1-903-498-3364 E-mail: [email protected]