Larson Electronics 4-Stage Light Mast - 7-20' - Cord Reel Mounting Plate - H-Mount Mast Head - (4) D-Rings

Made in the USA The LM-18-7-4S-FM-MODIDC-M1-2FT.H-NYC-MOD1 from Larson Electronics is a 4-Stage Light Mast with Cord Reel Mounting Plate that provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to eighteen feet. This light tower features a rotating boom that allows for 360¡ of rotation, a cord reel mounting plate and a H-head component at the top of the pole which allows up to 8 pieces of equipment to be mounted. The heavy-duty mast comes with a wide foundational base at the bottom of the pole for support and includes four D-rings on the mast head to attach safety cables from customer provided lights. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping four stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 18` for effective coverage. This light boom can be extended to 18` for maximum area coverage and collapsed to 7` for applications where a smaller footprint is required. The tower is constructed of schedule 40 1.5-inch round conduit with a base stage 5.98` in length and 5" by 5" by 3/16" thick, third stage 5.56` and 4" by 4" by 1/8" thick, second stage 5.27` and 3" by 3" by 1/8" thick and a top stage 4.98` and 2" by 2" by 1/8" thick. Each section has a 2` minimum overlap. The mast is elevated by pressing down on the end of base stage, elevating the mast into the upright position. The mast is extended to its full height using an included 1,000 lbs hand winch with 3/16" galvanized cable. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics or galvanized for superior corrosion resistance. A removable 44" wide H-mount mast head for the convenient mounting of desired equipment. This mast head design features two mounting platforms to allow operators to mount a wide variety of equipment and is attached to the upper section of the mast which provides a strong and stable platform for light fixtures and equipment. The LM-18-7-4S-FM-MODIDC-M1-2FT.H-NYC-MOD1 also features a cord reel mounting plate. The mounting plate measures 12" x 9" and is located at the base stage of the light mast above the winch. This component is also powder coated in glossy blue to match the mast. This tower also includes (4) D-rings, centered on each side of the mast head, allowing operators to attach safety cables to customer provided lights to tie down the lamps. The LM family of telescoping towers feature a proprietary mast guidance system, which provides increased stability during high winds. When lowered to 4.5`, the mast can withstand winds up to 125 mph. This light tower weighs approximately 150 lbs and can easily support and lift 125 lbs fixtures. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 8` long, 4` wide, 5` tall and weighs approximately 375 lbs. Larson Electronics can custom tailor these units to the customer`s requirements with longer sections and larger mounting plates. We also offer a choice of either the manual 1,000 lbs hand winch included standard or optional electric winch. Power: The LM-18-7-4S-FM-MODIDC-M1-2FT.H-NYC-MOD1 includes weatherproof 3/4" coiled cable that runs the length of the tower to secure wiring during deployment. The wiring wraps around the mast and ends in a top located junction box. This wire management prevents installed cable from getting hung up during deployment operations and reduces chances of damage to the cable. Mounting: The LM-18-7-4S-FM-MODIDC-M1-2FT.H-NYC-MOD1 is offered with a wide base at the bottom of the mast for robust support. This feature utilizes a wide foundational base at the bottom of the pole with two bolts at every corner (total of 8). A total of four vertical right-angle plates, located at every side of the pole, provides additional support for the foundational base, ensuring it does not warp or bend. Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LEDLB-200X2E , LEDLB-160X2E or LEDLB-80x2E. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LM-18-7-4S-FM-MODIDC-M1-2FT.H-NYC-MOD1 - 18` Four Stage Telescoping Light Tower Quick Summary Length: Telescoping from 7` to 20` 7` to 20` Foot Light Mast Weight: +-150 lbs Steel Construction Capacity: 125 lbs Corrosion Resistant Finish Materials: Steel Removable Mast Head Finish: Powder Coated (Gloss Blue) or Galvanized 125 mph Wind Resistance Operation: (1) 1,000lbs Manual Winch, Electric Optional Manual or Optional Electric Operation Cable: 3/16" Aircraft Cable Cord Reel Mounting Plate Top Mast: 44"W H-Mount Mast Head w/ (2) Mounting Platforms Wire Management: Weatherproof 3/4" Coiled Cord with Top Located Junction Box Mounting: 12" x 9" Cord Reel Mounting Plate / (4) D-rings Special Orders- Requirements Anchor Bolts: (8) Bolts w/ Wide Foundational Base Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: 8`-L x 4`-W x 5`-H Toll Free: 888-325-4448 Shipping Weight: +-375 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected]