Larson Electronics 30KVA Power Substation - 480V to 208Y/120V 3PH - (10) Receptacles - Manual Crank Cord Reel

Made in Texas The Larson Electronics MGS-480D-4X30A-30KVA-208Y.120-6X15A-1X30A-RD power distribution substation converts 480V AC electrical current into three phase 208Y/120V AC. Equipped with a manual-crank cord reel, this unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGS-480D-4X30A-30KVA-208Y.120-6X15A-1X30A-RD portable power distribution system gives operators the ability to power their three phase 480V, 208V and 120V equipment from a single system. On the primary side, operators connect 480V line-in power via 35` of Type W cord with a 4100P7W cord cap and to one L17-30R receptacle and three L20-30R receptacles for 480V equipment. On the secondary side, operators connect to one L15-30R receptacle for 208V equipment and to six 5-15R GFCI receptacles for 120V equipment. All receptacles are equipped with weatherproof covers. Operation: The 40` Type W line-in cord with a 100-amp 480V 4100P7W cord cap brings 480V three phase power to the NEMA 3R 100-amp 480V three phase main circuit breaker panel, which contains one 40-amp 3-pole 480V breaker and four 30-amp 3-pole 480V breakers protecting one 30-amp 600V-rated L17-30R receptacle and three 30-amp 347/600V L20-30R receptacles, and passes power to the transformer. The NEMA 3R 30KVA transformer converts 480V power to 208Y/120V three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp 208Y/120V three phase main lug panel. This secondary panel contains one 30-amp 3-pole 250V breaker protecting one 30-amp 250V L15-30R receptacle and six 15-amp 1-pole 125V breakers protecting six 15-amp 5-15R GFCI receptacles. Cable management is provided via an included manual-crank cord reel that provides storage for the 40` Type W line-in cord when not in use or during storage. Operators can utilize the cord reel to keep the cable organized when deployed around the work area. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet allows easy lifting with cable or chain hooks. This can be replaced with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs for an additional cost. Larger units are available upon request, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4x equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-480D-4X30A-30KVA-208Y.120-6X15A-1X30A-RD Power Transformer Ratings Line-In Cord: 40` Type W Cord Max OCP Primary: 100A @ 480V Line-In Cord Cap: 100A 4100P7W [480V] Max PDU OCP: 40A @ 480V Primary Voltage: 480V AC 3PH Max Secondary Output: 83.3A @ 208V Primary Panel: 100A 480V 3PH MCB N3R UL 1640 Portable Power-Distribution Equipment Primary Breakers: (1) 40A 3P [480V], (4) 30A 3P [480V] NEMA 3R Indoor or Outdoor Use Primary Receptacles: (1) 30A L17-30R [600V Rated], (3) 30A L20-30R [347/600V] Made in the USA Primary Protection: Breakers, Weatherproof Covers Transformer: 30KVA 480V to 208Y/120V 3PH 60 Hz N3R Secondary Voltage: 208Y/120V AC 3PH Secondary Panel: 100A 208Y/120V 3PH MLO N3R Secondary Breakers: (1) 30A 3P [250V], (6) 15A 1P [125V] Secondary Receptacles: (1) 30A L15-30R [250V], (6) 15A 5-15R GFCI [125V] Secondary Protection: GFCI, Weatherproof Covers Special Orders- Requirements Accessories: Manual Crank Cord Reel Contact us for special requirements Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, 4-corner top pick eye & locking 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 48” X 48” X 62” Fax: 1-903-498-3364 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*Scroll Down to Purchase