Larson Electronics 30' Portable LED Light Tower - 20kW Diesel Generator w/ 50 Gal Tank, (4) LED Lamps - Trailer Mount WCDE-LE-20KW-4X250LTL-LED-M1

Made in Texas

The WCDE-LE-20KW-4X250LTL-LED-M1 Portable LED Light Tower from Larson Electronics is a towable lighting package powered by a 20 kW generator. This system features a 30' telescoping mast with manual winch operation for elevating four LED floodlights. With four 250-watt lamps producing 138,000 lumens, this unit will illuminate a 1/2 acre outdoor area continuously without refueling for 80+ hours with lights only and 30 hours at full load. This mobile light tower is made in USA (made in Texas) and is BAA compliant.

The WCDE-LE-20KW-4X250LTL-LED-M1 mobile light tower is a powerful lighting solution for outdoor, remote locations. This unit is supported by a water cooled, diesel generator which supplies the current to four 250-wattÊLED lamps producing 34,500 lumens each for a combined total of 138,000 lumens of light. The light mast can provide 80+ hours of continuous illumination, at extended heights up to 35 feet.

This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. The system is FAR 52.225-2 compliant, Buy American Act Compliant and BAA compliant.

Generator: With engine speeds of 1,800 rpm, the four-cylinder unit is capable of generating 20 kW prime power during use. As a low-rpm generator, it operates quieter than 3,600 rpm "throw-away" models. Because 3,600 rpm generators have higher speeds, the units wear out faster and require less copper during operation.

The WCDE-LE-20KW-4X250LTL-LED-M1 is equipped with a 50-gallon polyethylene fuel tank. It features single-phase 120/240V at 167 amps (120V) or 83 amps (240V), as well as a 4-position key activated switch (off, run, glow and start). This unit will automatically shut down in the event of an abnormal condition related to low oil pressure and high coolant pressure. This system comes with an hour meter and glow plugs.

Receptacles: An included 60-amp main breaker features four receptacles protected by breakers: one 30-amp breaker protecting one 30-amp L6-30R 250V NEMA twist-lock receptacle, one 30-amp breaker protecting one 30-amp L14-30R 125/250V NEMA twist-lock receptacle and two 20-amp breakers protecting two 5-15R/5-20R 120V NEMA T-slot duplex outlet.

Lights: The lighting system on this unit is comprised of four, 250-watt LED lamps producing 34,500 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating a 6 acres with a combined total of 138,000 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps have a 60¡ flood beam angle configuration for wide area illumination in outdoor areas.

Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs.

Durability: As well as unparalleled heat control, the GAU-LTL-250W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.

Light Controls: Operators can access individual on/off controls for individual fixtures. These LED floodlights are protected by a 15-amp breaker per circuit.

Telescoping Boom: The fold-over telescoping boom extends up to 30 feet through the use of a dual, self-braking winch and allows for rotating the lights 359 degrees. The telescoping boom is capable of withstanding 50 mph winds when extended to its full height and the stabilizing outriggers are deployed.

Housing: All of the operating components are housed within a protective compartment constructed of 14ga sheet steel, which is designed to provide airflow for cooling. Side wing doors provide access to the interior while latches provide secure closing when the unit is in use. The entire unit can be loaded and unloaded onto trucks via forklift skid pockets at the bottom of the system or four D rings. The entire unit is mounted onto a two-wheel trailer with a 2,200 lbs leaf spring axle. A standard reversible 2" ball hitch/3" NATO pintle hitch and two standard safety chains allow for easy hookup and towing.

Applications: This portable generator is suitable for use in remote locations, such as temporary camps, construction sites, military bases and areas without reliable access to the grid. It can be utilized to power a wide range of heavy duty tools and equipment, including laptops, portable machines and mobile devices. The unitÕs robust recharging options offer flexibility in environments where access to reliable power sources are severely limited.

Summary of Specifications:

Diesel Fueled Light Tower

Fuel System

¥ Tank usable fuel volume 40 US gal

¥ Fuel filter with replaceable element

¥ Polyethylene tank

¥ Liquid cooled

Power Generation System

¥ 60 Hz Engine/Generator

¥ Electric Brushless

¥ Up to 20 kW output (Standby)

¥ 120/240 VAC 167/83 A

Electrical System

¥ Minimum 30A start limit breaker (ensuring no load conditions exist at start-up)

¥ Individual floodlight/LED circuits with 15 A breakers

¥ Convenience receptacles with individual breakers

¥ Wet cell battery

¥ Key activated power switch

¥ Individual ON-OFF switch for each light fixture

¥ Automatic shutdown for low oil pressure and high coolant temperature

¥ Hour meter

¥ Wiring sized and fused to required amperage draw

Trailer and Housing

¥ Durable, steel vented housing customized to store, protect and maximize functionality of power generation, power storage and light tower components

¥ Towing specifications and requirements Ð 2Ó ball size, wheelbase 48Ó to 60Ó overall dimension of 145Ó long, 60Ó wide, 88Ó high

¥ Maximum towing weight- 3600 pounds

¥ 4 per unit ÒDÓ rings to secure unit for transport

¥ Forklift pockets on trailer base for low point access

¥ Crane hook pocket on mast for high point access

¥ Brake lights and all applicable lighting and reflective requirements for highway usage

¥ High capacity trailer rated tires

¥ Trailer brake package

¥ Safety chains

¥ Straight removable tongue for shipment or storage

¥ Height adjustment hitch up and down and capability to switch to a pintle hook combo hitch set up

¥ Minimum 4 outrigger jacks for stability and safety

Light Tower

¥ Light towers that extends to 30Õ

¥ Mast has rotation capabilities that can be rotated and locked into position

¥ (4) 250W LED Flood lights per unit. Minimum total of 34,500 initial lumens per unit.