Larson Electronics 30 KVA Temporary Power Distribution Panel with Casters - 480V Three Phase to 480/277V Three Phase

Made in the USA This portable power distribution system features a 30KVA isolation transformer with 480 Delta on the primary side and 480/277 Wye on the secondary side. The line-in 480 Volt is provided by the operator and is connected to a 60-amp fused disconnect. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The transformer is mounted to a 1/8” thick steel plate and the distribution assembly is mounted within a rugged 2 inch (3/16 wall thickness) square carbon steel frame, measuring 42" wide by 48" deep by 54" height. For transport and loading the powder coated steel frame includes steel skid pockets and a top located lifting eyelet to allow easy transport. Four 8" locking casters enable operators to move the system easily from one location to another. Applications:This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Specifications / Additional Information MPD-480-30K-480I-NO Power Transformer Ratings Line In: 480V Three Phase (customer supplied line-in cable) UL 1640 Portable Power-Distribution Equipment Primary protection: 480V 60-amp fused disconnect NEMA 3R Indoor or Outdoor Use Transformer: 30KVA 480 Delta to 480/277V 3-phase, 60 Hz Made in the USA Line Out: 120/208V 3-Phase Secondary Panel: None Special Orders- Requirements Form Factor: Cube style, powder coated steel frame Contact us for special requirements Portability: Skid pockets, top pick eye and four 8” locking casters Toll Free: 888-325-4448 Dimensions: 42"-W X 48"-D X 54"-H Weight: 445 Lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase-