Larson Electronics 30 kVA C1D1 EXP Proof Transformer - 480V 3P to 208Y/120 3P - Input/Output Hubs - Copper Windings

The EMPD-480.3P-30KVA-208Y.120-CU from Larson Electronics is an explosion proof transformer for use in hazardous locations. Suitable for both indoor and outdoor applications, the EMPD-480.3P-30KVA-208Y.120-CU provides increased reliablity, protection against critical equipment failures and an extra level of protection by isolating the power source from the connected device. The EMPD-480.3P-30KVA-208Y.120-CU is rated for Class I & 2 Divisions 1 & 2 hazardous areas. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 30kVA, the EMPD-480.3P-30KVA-208Y.120-CU is a three phase unit with a primary voltage of 480V Delta. It also provides a seconday voltage of 208Y/120 Wye. The transformer contains a two-winding primary and secondary configuration and reverse connectables, as well as electrostatically shielded components and wire leads connection. Featuring robust construction, this unit is made out of cast aluminum. The explosion proof transformer comes with a NEMA 4X rating, which offers watertight protection and corrosion resistance. The following input/output hubs can be found on this unit: 3/4" NPT (input) and 3/4" NPT (output). The EMPD-480.3P-30KVA-208Y.120-CU may be mounted on compatible surfaces in Class I and Class II environments. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: Chemical processing plants, oil refineries, wastewater facilities and other classified industrial facilities that adhere to the ratings of this unit. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EMPD-480.3P-30KVA-208Y.120-CU Explosion Proof Transformer Ratings/Approvals Unit Type: Explosion Proof Transformer Class I, Divisions 1 & 2, Groups B, C & D Dimensions: 30"L x 41.25"W x 30"H Class II, Divisions 1 & 2, Groups E, F & G Phase: Three Phase UL Listed kVA: 30 NEMA 3, 4 - IP66 Primary Voltage: 480V Delta Secondary Voltage: 208Y/120 Wye Frequency: 50/60Hz Primary/Secondary Configuration: Two Winding Winding Material: Copper Reverse Connectable: Yes Connection Type: Wire Leads Electrostatically Shielded: Yes Temp Rise/Insulation: 115¡C/180¡C Sound Level: Meets NEMA ST-20 Standards Special Orders- Requirements Enclosure Material: Cast Aluminum Contact us for special requirements Input/Output Hubs: 3/4" NPT Input and 3/4" NPT Output Hubs Toll Free: 888-325-4448 Mounting: Surface Intl: 1-214-616-6180 Weight: 350 lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase