Larson Electronics 3 Watt Infrared LED Strobe Light - Fast and Slow Dual Flash Rate - Inline Control Box - Low Voltage

Made in the USAThe LED10W-1SS-IR-DFR Infrared LED Strobe Light from Larson Electronics is multi-voltage capable and equipped with a 100 lbs grip magnetic base and cigarette plug connector to produce a portable and easily deployed IR light source. 750Nm, 850Nm or 940Nm versions are available. The LED10W-1SS-IR-DFR features a dual flash rate which means the unit has two fast flashes followed by two slow flashes.This ultra compact, high powered infrared LED strobe light projects an 750Nm, 850nm or 940nm infrared light. Included with this IR LED light is 1 high-powered 3 Watt LED emitter potted into an aircraft grade aluminum chassis that is designed to protect the LED and dissipate heat. Even after running for a several hours, the lenses are only mildly warm. This infrared LED strobe light is avaiable in either 12V DC or 24V DC configurations and is configured to flash fast two times followed by two slow flashes. (dual flash rate). LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.This fixture is 2 inches wide by 2 inches tall, by 2.5 inches deep and draws only 1/4 amp on 12 volts and puts out an infrared beam that reaches 125 feet. Mounting hardware includes a 100 pound grip 3.25 inch magnetic base, anti-vibration bushing and adjustable positioning brackets, resulting in a total unit height of five inches.The rugged aluminum extrusion housing on this unit provides optimum durability and heat dissipation. The IP67 ingress protection rated housing makes this IR LED strobe light impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. These LED lights are certified to 6G RMS with vibration tests to ensure performance in high impact conditions.The light terminates with a short pigtail with Deutsch connector. An included 8 foot straight cord connects the light to the control box and another 8 foot straight cord terminates in a cigarette plug. The control box features a 3 position toggle switch, for on, off and beaconing mode. Thus, this LED IR strobe light can be used for continuous on or dual flashing mode with a toggle switch change. This light can also be ordered in 10 degree spot mode for a longer, tighter more concentrated light beam or 35 degree flood mode to produce a wider beam spread closer to the unit.Voltages: This unit is available in either a 12V DC version or a 24V DC version. Make your selection when ordering below.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information LED10W-1SS-IR-DFRFeaturesLamp Type: LEDIP68 Rated WaterproofLamp Dimensions: 2"W x 2"H x 2.5"D850nm or 940nm InfraredLamp Weight: 1.2 lbs12V DC or 24V DCVoltage: 12V DC or 24V DCStrobe or Constant OnSpot Beam: 125`L x 25`W100Lbs Grip Magnetic BaseFlood Beam: 45`L x 40`WCE CertifiedLumens: 800 - IR EquivalentEN55015 EMILighting Configuration: 10¡ Spot or 35¡ FloodEN61547 EMSMounting: 100 lbs Grip Magnetic BaseEN62471 Photobiological SafetyIR Wavelength: 750Nm, 850nm or 940nmAmbient Operating Temp: -45¡C to 85¡C Special Orders- RequirementsLED Lamp Watts: 3 Watts Contact us for special requirements Wiring: Deutsch Connector-Control Box-Cigarette PlugToll Free: 888-325-4448Lamp Life: 50,000+ HoursFax: 1-903-498-3364Warranty YES - 1 Year*E-mail: [email protected] Scroll Down to Purchase-