Larson Electronics Infrared LED Strobe Light - 3 watts - Quad Flash – IR 850/940nm - Adjustable Permanent Mount Plate

Made in the USA The LED10W-1SS-IR-PM Infrared LED Strobe Light with Adjustable Mounting Plate from Larson Electronics is a multi-voltage capable light equipped with a permanent mounting plate with swiveling and tilting bracket, and a cigarette plug connector that produce a portable and easily deployed IR light source. 750Nm, 850Nm or 940Nm versions. This ultra compact, high powered infrared LED strobe light projects an 750Nm, 850nm or 940nm infrared light. Included with this IR LED light is 1 high-powered 3 Watt LED emitter potted into an aircraft grade aluminum chassis that is designed to protect the LED and dissipate heat. Even after running for a several hours, the lenses are only mildly warm. This infrared LED strobe light can be powered on DC voltage ranging from 9-48 Volts DC and is configured to flash 4 times per second (quad flash). This fixture is 2 inches wide by 2 inches tall, by 2.5 inches deep and draws only 1/4 amp on 12 volts and puts out an infrared beam that reaches 125 feet. Mounting hardware includes a permanent mounting base with a 4 inch square plate that has 4 corner holes, enabling the operator to permanently bolt down the powder coated, steel plate. The stud on top of the swiveling, tilting bracket is threaded into the light. The base swivels 360 degrees and tilts 140 degrees via a tension hinge. The rugged aluminum extrusion housing on this unit provides optimum durability and heat dissipation. The IP67 ingress protection rated housing makes this IR LED strobe light impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. These LED lights are certified to 6G RMS with vibration tests to ensure performance in high impact conditions. The light terminates with a short pigtail with Deutsch connector. An included 8 foot straight cord connects the light to the control box and another 8 foot straight cord terminates in a cigarette plug. The control box features a 3 position toggle switch, for on, off and beaconing mode. Thus, this LED IR strobe light can be used for continuous on or flashing mode with a toggle switch change. This light can also be ordered in 10 degree spot mode for a longer, tighter more concentrated light beam or 35 degree flood mode to produce a wider beam spread closer to the unit. Voltages: This unit is multi-voltage capable and automatically sense and adjusts incoming current to the correct levels. As a result, this unit can be operated with voltages of 9 to 48 VDC without additional hardware. Specifications / Additional Information LED10W-1SS-IR-PM Features Lamp Type: LED IP68 Rated Waterproof Dimensions: 2"-Wide, 2" Height 2.5"-D 850nm or 940nm Infrared Lamp Weight:1.2 lbs 9-50 Volts DC Voltage: 9-48 VDC Strobe or Constant On Spot Beam: 125`L x 25`W Adjustable Permanent Mounting Plate Flood Beam: 45`L x 40`W Lumens: 800- IR Equivalent Lighting Configuration:10¡ Spot or 35¡ Flood Mounting: Permanent Mounting Plate w/ Swiveling/Tilting Bracket IR Wavelength:750Nm,850nm or 940nm Ambient Operating Temp: -45 degrees C to 85 degrees C LED Lamp Watts: 3 Watts Special Orders- Requirements Wiring: Deutsch Connector-Control Box-Cigarette Plug Contact us for special requirements Lamp Life: 50,000+ Hours Toll Free:888-325-4448 Warranty: YES Fax:1-903-498-3364 E-mail: [email protected] CE Certified EN55015 EMIEN61547 EMSEN62471 Photobiological Safety Scroll Down to Purchase