Larson Electronics 2KVA Portable Transformer - Converts 220/240V AC to 120V AC - (1) 16A Schuko & (1) 5-20R Receptacle

Larson Electronics

(No reviews yet) Write a Review
SKU:
TX-2KVA-FT220.110-15ACB-1X120.20A
Weight:
0.00 LBS
Call for price
Made in Texas The Larson Electronics TX-2KVA-FT220.110-15ACB-1X120.20A portable power distribution converts 240V AC single phase input voltage and steps it down to 120V AC single phase output voltage. This 2 KVA transformer features a 220/240V EU1-16R 2-pin schuko primary receptacle on the primary side and a 120V 5-20R GFCI protected duplex receptacle with a weatherproof cover on the secondary side. The unit provides operators the ability to safely tap into and distribute 240V AC power from a variety of sources including generators and direct grid power. The TX-2KVA-FT220.110-15ACB-1X120.20A temporary portable stepdown transformer from Larson Electronics gives operators the ability to power their 220/240 volt and 120 volt equipment from a single system. On the primary side, operators connect 220-240V AC line-in power via a 20` 16/3 SOOW cord. Operators connect 220/240V AC equipment to one EU1-16R 2-pin schuko 220/240V receptacle. On the secondary side, operators connect to one 5-20R GFCI duplex receptacle for their 120V AC equipment. The TX-2KVA-FT220.110-15ACB-1X120.20A portable distribution system converts 240V AC single phase into 220/240V AC primary voltage and 120V AC secondary voltage, which is brought in via 20` 16/3 SOOW cable that is fitted with an industrial grade 16A EU1-16P 2-pin Schuko line-in cord cap. Primary voltage (220/240V AC) is distributed from the 2 KVA 240-120V single phase transformer to one EU1-16R 2-pin schuko receptacle, protected by a 15-amp din-rail mount circuit breaker and a weatherproof cover. Secondary voltage (120V AC) is distributed from the 2 KVA 240-120V single phase transformer to one 20-amp 5-20R GFCI protected duplex receptacle and a weatherproof cover. A top located cord management system allows operators to roll up the line-in cord when it is not in use and roll up the extra slack in the power cable during use. Each of the two receptacles provide sealed and secure connections for one connected device per receptacle and are equipped with weatherproof covers that protect the faces from rain, water, and moisture when not in use. The housing on the TX-2KVA-FT220.110-15ACB-1X120.20A is constructed from powder coated steel with a NEMA 3R enclosure rating. The angled base and low center of gravity ensure this low voltage transform does not tip over when in the field. The entire unit is powder coated with glossy blue finish for corrosion resistance and aesthetics. A top located adjustable carrying handle allows operators to carry this unit through the workspace. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information TX-2KVA-FT220.110-15ACB-1X120.20A Portable Transformer Features/Ratings Line-In Cord: 20` 16/3 SOOW Cord Max OCP Primary: 16A @ 240V Line-In Cord Cap: 16A EU1-16P 2-pin Schuko Max OCP Secondary: 20A @ 120V Line-In Voltage: 220-240V AC UL 1640 Portable Power-Distribution Equipment Primary Receptacles: (1) EU1-16R 2-pin Schuko Receptacle [220/240V] NEMA 3R Weatherproof Primary Protection: 15A Din-rail Mount Circuit Breaker, Weatherproof Cover Top located cord management Transformer: 2 KVA 240-120V 1P Top mounted carry handle for portability Secondary Voltage: 120V AC Secondary Receptacles: (1) 5-20R GFCI Duplex [120V] Special Orders- Requirements Secondary Protection: GFCI, Weatherproof Cover Contact us for special requirements Frame Materials: Stainless Steel Enclosure w/ Powder Coated - Gloss Blue Finish Toll Free: 888-325-4448 Dimensions: 34” X 44” X 36” Weight: 300 pounds E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase

Reviews